Product Description
Product Description
| Heat treatment | Harden teeth, tempering, queching |
| Surface treatment | zinc plated, blacken, phopharization, carborized |
| Process | Forging( casting)—lathe- teeth shaping—finishing—oil washing—Packing ,made by CNC machine |
| Inspection | All items are checked and tested thoroughly during every working procedure and after the product is finally manufactured to ensure that the best quality product enter into the market. |
Company Profile
In 2571, HangZhou CZPT Machinery Co.,ltd was established by Ms. Iris and her 2 partners(Mr. Tian and Mr. Yang) in HangZhou city(ZHangZhoug province, China), all 3 Founders are engineers who have more than averaged 30 years of experience. Then because the requirements of business expansion, in 2014, it moved to the current Xihu (West Lake) Dis. Industrial Zone (HangZhou city, ZHangZhoug province, China).
Through our CZPT brand ND, CZPT Machinery delivers agricultural solutions to agriculture machinery manufacturer and distributors CZPT through a full line of spiral bevel gearboxes, straight bevel gearboxes, spur gearboxes, drive shafts, sheet metal, hydraulic cylinder, motors, tyre, worm gearboxes, worm operators etc. Products can be customized as request.
We, CZPT machinery established a complete quality management system and sales service network to provide clients with high-quality products and satisfactory service. Our products are sold in 40 provinces and municipalities in China and 36 countries and regions in the world, our main market is the European market.
Our factory
Our sample room
Certifications
Why choose us?
1) Customization: With a strong R&D team, and we can develop products as required. It only takes up to 7 days for us to design a set of drawings. The production time for new products is usually 50 days or less.
2) Quality: We have our own complete inspection and testing equipment, which can ensure the quality of the products.
3) Capacity: Our annual production capacity is over 500,000 sets, also, we also accept small quantity orders, to meet the needs of different customer’s purchase quantities.
4) Service: We focus on offering high-quality products. Our products are in line with international standards and are mainly exported to Europe, Australia, and other countries and regions.
5) Shipment: We are close to HangZhou and ZheJiang ports, to provide the fastest shipping service.
Packaging & Shipping
FAQ
Q: Are you a trading company or manufacturer?
A: We’re factory and providing gearbox ODM & OEM services for the European market for more than 10 years
Q: Do you provide samples? is it free or extra?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: How long is your delivery time? What is your terms of payment?
A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization.
For standard products, the payment is: 30% T/T in advance,balance before shipment.
Q: What is the exact MOQ or price for your product?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.
Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation.
If you have another question, please feel free to contact us.
| Standard Or Nonstandard: | Standard |
|---|---|
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
| Hardness: | Hardened Tooth Surface |
| Manufacturing Method: | Rolling Gear |
| Toothed Portion Shape: | Spur Gear |
| Material: | Steel, Stainless Steel, Plastic,etc. |
| Customization: |
Available
| Customized Request |
|---|
How to choose the right sprocket
Knowing the size of the chain is important when looking for the right sprocket. Also, you must know the number of teeth you need and their angle. The angle between the teeth is equal to 360 degrees divided by the number of teeth. This information will help you find the right sprocket for your specific application.
Long Through Hole
Sprockets are critical to the efficiency and uptime of roller chain drives. To ensure your sprocket is installed correctly, it is important to know the dimensions of the sprocket, including its outside diameter, through-hole length, and hub diameter. Pore size is also an important consideration. Most sprockets have a 1/8″ bore, while others may have a larger bore.
Sprockets are usually secured to the shaft using ANSI standard-sized keyways and set screws. However, not all sprockets are compatible with all shaft diameters, so it is important to check the keyway size before purchasing.
Sprockets are available in a variety of styles and configurations. Some types of sprockets are welded to a solid hub, while others are bolted or split to the hub. Both types have different adjustments and you can easily change them without disassembling the device. Sprockets can be purchased from many US manufacturers in A, B or C hub configurations. For example, the hub diameter of an A-type sprocket determines its width, while a B-type sprocket has a hole for a bushing.
Sprockets are used in chain-driven motion systems, usually to carry heavy loads. It is very important to choose the right app for the right app to avoid damaging your device. If you’re not sure, learn about your system and how it’s assembled.
face width
The face width of the sprocket is limited by the meshing clearance with the chain. It does not affect tooth length. The outside diameter of the chain tip may vary depending on the type of tool used. Dimensional tolerances for keyways and set screws are also important.
diameter
One of the most important characteristics of a sprocket is its diameter. The diameter of the sprocket is used as a guide for choosing the proper sprocket size for your bike. Its number of teeth and diameter also affect the size of the chain.
The diameter of a sprocket is a function of its pitch or the distance between the centers of the link hinges. Diameters are in millimeters and expressed in standard ANSI chain numbers. Popular spacing is 3/8″ or 1/2″.
In order to make the chain drive smoothly, the sprocket and the chain should be properly matched. Incorrect pitch sprockets can damage the chain and shorten its life. Sprockets should provide precise tooth count, consistent pitch, and high wear resistance. It should also be designed to be rigid and impact resistant. CZPT chain suppliers can custom design sprockets in a variety of sizes, pitches, and diameters to suit your needs.
The number of teeth on the roller sprocket is also important. This is because the sprocket is in contact with the chain, causing frictional wear. The teeth on the sprocket can affect the durability of the chain, which is why choosing a sprocket with hardened teeth can change the world.
hub type
The hub type of the sprocket is key to proper engagement with the chain. Several options are available. The sprocket hub type is cylindrical and is available in a variety of sizes and styles. Sprockets are usually made of steel or stainless steel.
There are four main types of hubs for sprockets. They come under different names from different manufacturers, but they all share some common characteristics. These include Types A, B, and C. Each type has its own advantages and disadvantages. A-Plate sprockets are flat and have no hubs, while B-Hub sprockets are flat with hubs mounted on one side of the plate. C-shaped sprockets extend on both sides of the plate for larger pitch circle diameters and heavier axles.
A sprocket with a large pitch diameter needs a sprocket with a large pitch, and a chain with a small pitch diameter needs a chain with a small pitch. A-type sprockets are smaller and fit more closely to the equipment, while C-type sprockets need to be wider and thicker to carry more weight. Also, the pitch diameter is important because it determines whether the sprocket will fit correctly with the chain.
Steel split sprockets are easy to install and remove. They are held together by bolts on the hub, ranging in pitch size from 40 to 240. They are typically used in applications involving multiple drive shafts.
HZPT ZTB series
ZTB sprockets are an important part of a bicycle chain system. Its uptime is very important to maximize uptime and efficiency. key cSelect sprockets are characterized by size, pitch and bore. MDS accepts sprockets of various bore diameters from 1/2″ to 2″.
A sprocket is a wheel-like structure with teeth on the end. These teeth interlock with the chain, allowing simple rotational movement of large machines and equipment. ZTB sprockets are an excellent choice for a wide range of applications, including construction and agricultural machinery.
ISO sprockets have a suffix number indicating the number of chains in the chain. For example, 16B-2 sprockets have 1″ pitch and dual spools. If you’re buying sprockets for your bike, be sure to check the sprocket pitch.
The teeth on the sprocket are responsible for frictional wear, so choosing the right teeth is critical. The right teeth can increase the life of the sprocket and chain. A good sprocket has at least 17 teeth. Sprockets with a higher number of teeth last longer without causing chain slip. Typically, the teeth are the same material as the sprockets, but you can find removable teeth for a more affordable option. The teeth on the sprocket can also be hardened. Induction hardening is the most commonly used process.
ZTB sprockets can be made from many different materials. Some materials are more expensive than others, while others are softer and stronger. If you’re not sure which one to buy, try explaining the difference between the different sprockets to the sprocket manufacturer. They should be able to give you details about their interchangeability and quality.
set screw
Set screws are screws designed to hold two or more parts together. There are many different types of set screws, each with a different purpose and design. They usually come in imperial and metric sizes with a hex socket driver on one end and a cup tip on the other. They are made of hardened steel and have a black oxide finish. Some varieties have flanges, while others don’t.
Set screws with chain studs can be used in a variety of applications. For example, they can be used in agricultural equipment, heavy equipment and other industries. They come in several different sizes and thread sizes and are available in a variety of designs. Some are specific to the mining industry, while others are more general.
The company also offers custom setscrews, as well as hex, spline, square and socket heads. They have the capability to manufacture fasteners ranging from carbon steel to nickel and silicon bronze. Their products also meet Mil-I-4528 and QS 14000 standards.
editor by CX 2023-06-05
China supplier Agricultural Machinery Industry Made-to-Order or Plw Plywood Case Motorcycle Parts Sprocket sprocket bike part
Product Description
Agricultural Machinery Industry MADE-TO-ORDER Or PLW Plywood Case Motorcycle Parts Sprocket
Product Description
1. Produce strictly in accordance with standard dimension
2. Material: 1045 Steel / Alloy Steel / Stainless Steel 304 & 316
3. Standard: ANSI, DIN, JINS, ISO, KANA,Standard America or customer’s drawing
4. Pilot bore, finished bore, taper bore and special bore.
5. Bright surface / high precision / Blacking /Electrophoretic-Coated
6. Advanced heat treatment and surface treatment craft
7. Best quality and competitive price.
8. Welcome OEM / ODM
9. Processing Equipment: Hobbing machine, Slotting machine, CNC lathes and other equipment.
10. Sprocket Models: Contains special sprocket according to customer’s drawings, standard sprocket (American standard and metric).
Detailed Photos
View more products,please click here…
Company Profile
| Standard Or Nonstandard: | Standard |
|---|---|
| Application: | Machinery, Agricultural Machinery, Industry |
| Hardness: | Hardness |
| 40: | 1/2" |
| 50: | 5/8" |
| 60: | 3/4" |
| Samples: |
US$ 0/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Choosing the Right Chain Sprocket For Your Bike
When deciding which chain sprocket to buy, you should be aware of how they fit on the bike. These sprockets are often secured to the bike’s shaft by either one or more set screws. ANSI standards for sprocket keyways provide the proper dimensions for a given shaft diameter. However, they aren’t universal and might not apply to all applications. As a result, it is important to consult a supplier who is familiar with the exact keyway dimensions.
Roller chain sprocket
A Roller chain sprocket is a gear with toothed rollers. The tooth profile determines the arc length of the roller. A roller with an undercut tooth profile will not transmit movement properly. For this reason, the pitch line of the roller should be equal to the incremental circle length (r) divided by the number of teeth.
The chain sprocket is available in various types. They can be used in conveyor chains. They are usually available as ready-to-mount units. Finished bores and wide hubs are available for mounting them. They are also available with a roller-bearing design.
The teeth of sprocket wheels are derived from the involute-trochoid curve. In order to engage with these teeth, the roller chain must be sufficiently accurate to avoid backlash. However, conventional roller chains can also engage with these teeth. However, this cannot eliminate backlash completely. This is why the invention provides means for reducing the friction between the teeth and the roller. This also increases the life span of the roller-and-sprocket transmission.
In terms of standards, the ANSI standard is widely used in the industry. It accounts for nearly 15% of the market in Europe and holds an advantage over the ISO standards. In North America, manufacturers of sprockets follow the ANSI code B 29.1. The ANSI code provides clear design guidelines and allows for interchangeability among different types.
There are many considerations to make when selecting a sprocket. A key factor is the transmission input. For example, if the transmission has a high horsepower, the center distance between the large and small sprockets is smaller. To compensate for this, a chain with a smaller pitch may be appropriate. Also, if the transmission has a high horsepower ratio, a multiple-strand drive is a viable option.
If you’re looking for a quality roller chain sprocket, you should check out MDS. They stock a wide range of types and sizes for a variety of industrial machinery.
Gap-tooth sprocket
A gap-tooth chain sprocket has tooth-head heights greater than the ISO tooth form height. This ensures that the pins and rollers meet at a point near the tooth head, and eliminates pulsating movement and intermittent changes in speed.
The front and rear surfaces of the sprocket are convex arcs, with radii equal to each other and the center of the tooth gap bottom. This allows for a uniform pitch and reduced friction. The tooth-face height of a gap-tooth chain sprocket is equal to the pitch of the chain, while the radii of its tooth-faces are larger than that of an ISO tooth-form.
One form of gap-tooth chain sprocket has four teeth at regular intervals. The teeth are interconnected by arc-shaped tooth gap bottoms. The resulting chain pitch is called the chain pitch. The gap-tooth sprocket can be used on various types of wheels.
ISO 606 1994 (E) defines the standard chain length, while Japanese Industrial Standards (JIS B 1801) define the standard tooth form. The ISO and Japanese Industrial Standards define two different tooth forms, namely S-tooth and U-tooth. The ISO and Japanese Industrial Standard tooth forms have different tooth pitches, but the root diameter of both forms is the same. The distance between each tooth is measured from the pitch polygon.
The tooth gap bottom circle of the gap-tooth sprocket gradually contacts the surface of the front tooth in the opposite side of the tooth gap. As this process continues, the tooth surface of the gap-tooth sprocket moves closer to the tooth head. This reduces the impact, which results in less noise.
The gap-tooth chain sprocket is an ideal solution for many applications. It allows the chain to disengage easily. With the same frequency, the teeth of the sprocket also help in regulating vibration. A sprocket with short teeth will be easier to disengage when necessary.
Another popular style of gap-tooth chain sprocket is the random polygon 64. The random polygon is a quadrilateral. Each vertex of the quadrilateral is assigned to one of the four consecutive pins on the uniform chain. The four consecutive pins are aligned in a gap-tooth pattern.
Steel split sprocket
Split sprockets are perfect for large portions of the drive system, as they can be installed without disassembling the entire shaft assembly. These sprockets are also useful in applications where there is limited workspace. They can be installed without disassembling the entire shaft assembly, minimizing the risk of damage to the conveyor system and reducing downtime.
There are several different types of split sprockets, including mat chains and table chains. Each type differs in bore diameter, number of teeth, block body style, and abrasion resistance. Some are made from steel, while others are made from a non-split material.
Split sprockets are available from many manufacturers. Typically, the split sprockets are made with two pieces of steel, which are then joined together again. This assembly technique is a cost-effective way to mount sprockets on a shaft. These sprockets can be stocked in multiple sizes and keyways.
Stainless Steel sprockets are available in stock and custom configurations. They are designed to last for years to come. These sprockets are suitable for conveyors, power transmission systems, and robotics. In addition, these sprockets offer heightened quality and durability. Some of these sprockets feature a bevel or spiral bevel gear, while others are made from helical gear.
Split sprockets are available in a variety of sizes. For instance, the RCS-03 is a plain bore type, while the RCS-04 is a finished bore type. Split sprockets are available with a split taper bushed design. They are also available with either single or multiple strands.
Double-duty sprocket
If you are looking for a heavy-duty chain sprocket, you have many choices. They come in different sizes, shapes, and materials. Some have wide teeth while others have narrow teeth. You should choose a sprocket that has the correct tooth pitch for your chain’s pitch diameter. You should also pay attention to the sprocket’s bore, or the hole in its center through which the drive shaft passes.
The type of transmission will also determine the type of sprocket you need. High-power transmissions, for example, require higher-pitch sprockets than lower-pitch models. To make sure that you choose the right sprocket for your application, check the horsepower and pitch of your transmission. If you have a low-pitch transmission, choose a smaller chain pitch. High-horsepower transmissions may also require multiple-strand drive.
There are different standards for sprockets, but ANSI standards are widely accepted. For instance, ANSI code B 29.1 requires sprockets to have two teeth per chain pitch, whereas ISO standards call for three. The double-duty sprocket, on the other hand, engages every other tooth. This helps the sprocket’s lifespan.
There are many different sprockets, and each has different performance characteristics. Generally, sprockets are made of metal or reinforced plastic and are similar to bicycle gears in their wheel-shaped design. Different types of chain sprockets have different teeth and work with different types of chains. The design of the chain and sprocket also determines the type of sprocket needed.
One popular type of double-duty sprocket is the steel-split sprocket. Its pitch is half the pitch of the chain and is usually referred to as a ‘double-duty’ sprocket. It is often used for heavy-duty purposes, as it distributes the load evenly on the chain.
While sprockets come in different tooth pitches and diameters, the recommended number of teeth is 17. The more teeth on the sprocket, the longer it will last. The height of the teeth is also important. A sprocket with more teeth will increase the life of the chain.
editor by CX 2023-05-17
China supplier Big Food Packing Machinery Sprocket From China Sprocket Factory Scs sprocket bike shop
Product Description
Big food packing machinery sprocket from China sprocket factory SCS
With more than 20 years’ experience, high-precision equipment and strict management system, CZPT can provide sprockets, gears, shafts, flanges and related transmission parts for you with stable quality and best service.
Q1: What information will be highly appreciated for a quotation?
A: It will be preferred if you can offer us the drawings, heat treatment and surface treatment requirements, required quantity, quoted currency (USD or EUR), or samples.
Q2: Are you a trading company or factory?
A: CZPT is a factory located in HangZhou, ZheJiang .
Q3: What is your terms of payment?
A: T/T 50% in advance, and 50% before shipment. We’ll show you the photos of the products and packages before you pay the balance.
Q4: Do you test all your goods before delivery?
A: Yes, CZPT has adopted a strict quality management system and all the items will be inspected according to the inspection instruction with good inspection records.
Q5: Is there any customer that has assessed your quality management system?
A:Yes, CZPT has passed the audit of many customers, such as Mitsubishi, CLAAS, Kardex and so on.
Q6: How does your company ensure the quality of the raw material?
A: The steels are purchased from our domestic CZPT steel mills. After receiving the raw material, the steel will be inspected by spectrograph imported from Germany. Besides, the CZPT number of steel will be well-managed in our ERP system to ensure the traceablity of our products.
Q7: How do you ensure the high quality of products?
A: With integral manufacturing processes, a strict quality control system and imported machines, we can manufacture high quality products.
Q8: What are your terms of delivery?
A: EXW, FOB ZheJiang .
Q9: How about your lead time?
A: Normally it will take 45 days after receiving your advance payment. The specific lead time depends on the items and the quantity of your order.
| Standard Or Nonstandard: | Nonstandard |
|---|---|
| Application: | Motor, Motorcycle, Machinery, Agricultural Machinery, Car |
| Hardness: | Hardened Tooth Surface |
| Manufacturing Method: | Forging Parts |
| Material: | Carbon Steel |
| Teeth: | 9t-120t |
| Samples: |
US$ 9.99/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
How to Identify a Sprocket
When choosing a sprocket, you have several options. There are several types, each with unique features. In this article, we’ll discuss how to identify sprockets, and how to replace worn or damaged sprockets.
buy sprockets
When building a bicycle, sprockets are an important part of the drivetrain. Unfortunately, they’re hard to find outside of places like CZPT. Fortunately, there are some easy ways to find the right sprocket for your bike.
The first thing to consider is what kind of sprocket you need. Choosing the wrong sprocket can damage your equipment or cause it to fail prematurely. While sprockets come in a variety of sizes, there are some key features that can help you find the right one.
There are two basic types of sprockets. You can choose one made of steel or aluminum, or a combination of both. Most sprockets are made of steel, but there are also new aluminum sprockets that are similar to steel and last as long as steel. No matter which material you choose, it’s important to choose a reputable manufacturer with regular maintenance.
Buying sprockets that match your chain is another way to ensure proper installation. The chain goes through the sprockets thousands of times per minute, so the teeth eventually wear out. Poorly maintained sprockets can also cause “hook” teeth, which will cause your chain to stretch to the point where you can no longer adjust it.
Identify sprockets
One of the most common bicycle parts is the sprocket, which can be identified by its width and number of teeth. A single sprocket has one tooth along its circumference, while a double sprocket has two rows of teeth. Sprockets are also known by different names, including single, double, triple, and quadruple sprockets.
Roller sprockets are another type of sprocket. It runs along a chain of rollers connected by pins. It fits into the gap between the rollers in the chain to transfer kinetic energy. There are two basic styles of roller sprockets: single pitch and double pitch. Single-pitch sprockets are small and fit snugly against the equipment, while double-pitch sprockets are larger and require more thickness to support the weight.
Checking a sprocket is easy if you know how to count teeth. A simple caliper will allow you to easily find sprockets with worn teeth. Calipers also allow you to measure the hole of the sprocket, which is the inside diameter of the sprocket.
Another way to tell if a sprocket is worn is to visually inspect the sprocket. Worn sprockets can cause the chain to bounce, putting more pressure on the bearings and accelerating wear. It is also important to check the alignment of the sprockets. If it’s off center, it probably means the chain needs to be replaced.
Replace sprocket
If you want to maintain your bike, it’s a good idea to replace your chain and sprockets regularly. If you don’t, you may have a problem that will only get worse. Worn chains can also make noise, so it’s a good idea to check them regularly. Also, you should lubricate and tighten them regularly, especially when they reach their maximum mileage.
First, you need to determine the size of the chain. Usually, you’ll find it in the manual. Common sizes are 520, 525, and 530. The first number refers to the pitch of the chain, which is the distance between the rivets, while the second number refers to the width of the sprocket. For example, a 20-tooth sprocket is two and a half inches wide.
Replacing a sprocket is a relatively simple process. Be sure to clean the bike and apply wheel bearing grease before tackling the task. Next, remove the old chain from the rear wheel. Some bikes may have clevises or side panels that need to be removed. A flat-blade screwdriver works well for this problem. You can also use the Broken Links tool to remove split links.
You can also install new sprockets on your bike. After removing the old one, be sure to follow the manufacturer’s instructions for chain and sprocket size. You should also tighten the sprocket nut to the manufacturer’s torque setting. Once you’ve done this, be sure to check the chain tension to make sure it’s not too loose or too tight.
Replace worn chains
To prevent damage to the chain, the chain must be replaced regularly. It’s prone to wear and tear, but you can extend the life of your bike’s chain with a few simple steps. One of the steps is to lift the rear wheel of the bike so you can run the new chain through the rear derailleur. This will make the task easier because your bike won’t be lying on the floor. If you don’t have a bike rack, you can use cinder blocks, wood, or boxes to support your bike rack.
The most obvious sign is yIf your chain bounces under load, our chainrings need to be replaced. Using a chain gauge will let you know when you need a new chain. Chain gauges usually consist of two sides and are used to measure the amount of wear on the chain under a given load. You can check the gauge by placing it on the chain and making sure it sinks into the chain.
First, you need to delete the old chain. Some older chains use uniform pins that you can use to replace them. Make sure to get a chain that is the same length as the old one. Also, pay attention to the type of drivetrain your bike has. For example, if it has a rear derailleur, you will need a chain that matches the same drivetrain.
Check the sprocket for rust
One of the best ways to check your bike for rust is to look for surface rust. This is the first sign that the metal is starting to oxidize. Using a steel brush to remove surface rust is a good idea, but be sure to wear safety glasses. You can also clean the sprockets with WD-40 or kerosene.
Another indicator that a sprocket needs to be replaced is excessive wear. This may be caused by foreign objects conveyed by the chain. It may also be necessary to center the chain and drive sprocket and install guide rollers. Other signs of sprocket rust include excessive vibration due to improperly machined axle holes or a bent or bent chain.
You should also look for any kinks in the chain. If so, you may need to replace the chain. Also, look for any rust spots and excess grease. Also, you should check the sprockets to make sure they are properly aligned.
Besides rust, another sign of rust is the chain jumping out of the sprocket. This can cause the chain to jam and cause your bike to slip. This situation is also dangerous for you and other drivers.
Replace worn sprockets
You can repair your bike’s gears by replacing the sprockets. You should always check the chain for any signs of wear. In the case of a worn sprocket, you should check the teeth, which are usually tall and hooked.
If the sprocket is curled, skewed, or uneven, the sprocket is worn and needs to be replaced. If the sprockets are not replaced, they will wear out the chain very quickly. Chains should be replaced as soon as they show signs of excessive wear.
To replace a worn sprocket, you must first remove the old rear sprocket. To do this, loosen the bolts that hold the sprocket in place. You should also clean the hub surface with steel wool to reduce corrosion and wear.
Worn sprockets have worn teeth that keep the roller chain from slipping. This can cause the chain to climb up the sprockets and make a lot of noise. In addition to noise, chains can stick to worn sprockets and damage sprockets and chain. Don’t wait until the chain is out of control to fix it.
After the sprocket is removed, the rear sprocket and drive sprocket can be replaced. It is important to check the alignment of the sprockets, as incorrect alignment can cause premature chain wear. Proper alignment will distribute the load evenly across the entire width of the chain, extending the life of the chain. You can check the sprocket with a ruler or laser sight tool.
editor by CX 2023-05-16
China Standard 05b 06b 08b 10b Agricultural Machinery Driving Sprocket Transmission Sprocket Wheel with Teeth Hardened near me supplier
Merchandise Description
Product Description
one. Materials: Alloy Metal, Carbon Steel, Stainless Metal, Hardend & Tempered Steel, Solid Iron, Aluminum, Copper, Brass etc.
2. Heat Therapy: Hardening and Tempering, Substantial Frequency Quenching, Carburizing Quenching and so on.
3. Surface Therapy: Galvanizing/Zinc Plating, Dacrotized, Black Anodic Treatment, Spray Printing, Mirror Complete, Burnishing, Sand-blasting and so on in accordance to ROHS demand.
4. Inspection: All objects are checked and analyzed extensively during every single functioning process and soon after the product is lastly produced to make sure that very best good quality product goes out in the industry.
5. Sturdy, Great Use Resistance
6. Very good high quality with sensible price, well timed supply and fantastic client services.
A sprocket is a profiled wheel with teeth that meshes with a chain, monitor or other perforated or indented material. It is distinguished from a gear in that sprockets are by no means meshed with each other straight, and differs from a pulley in that sprockets have enamel and pulleys are easy.
Sprockets are used in bicycles, motorcycles, cars, tanks, and other machinery both to transmit rotary motion in between 2 shafts in which gears are unsuitable or to impart linear motion to a observe, tape and many others.
Thorough Photos
Product Parameters
Packaging & Transport
| Packing | Standard ideal package deal / Pallet or container. Polybag inside of export carton outside, blister and Tape and reel package deal accessible. If consumers have particular requirements for the packaging, we will gladly accommodate. |
| Transport |
10-20working days ofter payment receipt comfirmed (based on true quantity). Professional items shipping forward. |
Firm Profile
FAQ
Q: Are you buying and selling organization or manufacturer?
A: We are manufacturing facility.
Q: How prolonged is your delivery time?
A: Typically it is 5-10 times if the items are in inventory. or it is fifteen-20 times if the merchandise are not in stock, it is in accordance to quantity.
Q: Do you supply samples ? is it cost-free or additional ?
A: Of course, we could provide the sample for totally free charge but do not shell out the value of freight.
Q: What is your terms of payment ?
A: Payment=1000USD, 30% T/T in CZPT ,balance prior to shippment.
We warmly welcome close friends from domestic and abroad appear to us for organization negotiation and cooperation for mutual benefit. To supply consumers exceptional high quality goods with excellent price tag and punctual supply time is our duty.
Ep prefabricated metal sprockets are created of C1045 steel, induction hardened or heat-handled steel, four hundred – 500 BHN hardness. Remember to specify the materials you require. Except if or else requested, the outside diameter of the hub ought to be ample to accommodate the required holes and keyways. Keys to these things are not supplied unless of course asked for or installed on the shaft. Split sprockets for welding or split sprockets for bolts give an economical way to install sprockets on shafts where removal of the shaft assembly is prohibited. Many sizes of sprockets are outfitted with holes, keyways, and established screws. Discs or partly accomplished sprockets are also stocked. For lengthy sprockets and idlers, specify the chain measurement used.
Bushing Sprockets: Bushing sprockets can simplify chain method routine maintenance by replacing only worn sprocket assemblies, while the bushings can nonetheless be reused. The bushing also has a tightly tapered mating surface area that can transmit greater torques than easy vital parts. Shut-fitting surfaces give greater overall performance in programs with hefty commence/quit operations or shock loads.
China manufacturer Agricultural Machinery Made-to-Order or Plw Plywood Case ANSI DIN Sprocket Chain near me supplier
Product Description
Agricultural Equipment Produced-TO-Buy Or PLW Plywood Scenario ANSI DIN Sprocket Chain
Merchandise Description
1. Generate strictly in accordance with ANSI or DIN standard dimension
two. Material: 1045 metal / Stainless Steel 304 & 316
three. Standard: ANSI, DIN, JINS, ISO, Regular America or client drawing
4. Pilot bore, completed bore, taper bore and unique bore
5. Bright area and high precision
six. Sophisticated heat therapy and surface therapy craft
seven. Ideal good quality and aggressive cost
8. Welcome OEM / ODM
9. Processing products: Hobbing device, Slotting machine, CNC lathes and other products.
10. Sprocket versions: Contains special sprocket in accordance to customer’s drawings, common sprocket (American standard and metric).
| Product name | Zinc-Plated Driving Sprocket From China (05B16T-1) |
| Materials Available | one. Stainless Steel: SS304, SS316, etc |
| 2. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, and so on | |
| three. OEM according to your request | |
| Surface area Treatment | Warmth treatment, Quenching remedy, Higher frequency normalizing treatment, Polishing, Electrophoresis paint processing, Anodic oxidation treatment method, and many others |
| Characteristic | Fire resistant, Oil resistant, Heat resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, etc |
| Design criterion | ISO DIN ANSI & Customer’s Drawing |
| Dimension | Customer’s Drawing & ISO standard |
| Application | Industrial transmission equipment |
| Bundle | Picket Case / Container and pallet, or made-to-buy |
| Certification | ISO9001: 2008 |
| Advantage | High quality very first, Provider 1st, Aggressive value, Quickly supply |
| Supply Time | twenty times for samples. 45 days for official order. |
View more merchandise,please simply click here…
In depth Pictures
Company Profile
Ep prefabricated metal sprockets are made of C1045 metal, induction hardened or warmth-treated metal, 400 – five hundred BHN hardness. Make sure you specify the components you need. Except if or else asked for, the outside diameter of the hub ought to be adequate to accommodate the essential holes and keyways. Keys to these items are not provided until requested or put in on the shaft. Break up sprockets for welding or split sprockets for bolts offer an inexpensive way to install sprockets on shafts where removal of the shaft assembly is prohibited. Several measurements of sprockets are equipped with holes, keyways, and set screws. Discs or partially completed sprockets are also stocked. For extended sprockets and idlers, specify the chain dimension utilized.
Ep prefabricated steel sprockets are made of C1045 metal, induction hardened or heat-treated metal, 400 – 500 BHN hardness. Make sure you specify the materials you want. Unless normally asked for, the outdoors diameter of the hub should be adequate to accommodate the required holes and keyways. Keys to these products are not provided until requested or put in on the shaft. Split sprockets for welding or break up sprockets for bolts supply an economical way to set up sprockets on shafts where removing of the shaft assembly is prohibited. A lot of dimensions of sprockets are outfitted with holes, keyways, and established screws. Discs or partly finished sprockets are also stocked. For lengthy sprockets and idlers, specify the chain measurement employed.
China supplier Single Gear C45 Steel Idler Chain Sprocket for Quarry Machinery with Free Design Custom
Product Description
|
Company type |
Manufacturer & Exporter |
||
|
Major export market |
Europe, North and South The united states, Southeast Asia, Oceania, Middle East, Africa |
||
|
Material |
Alloy Metal, Carbon Steel, Stainless Metal,Aluminum, Copper, Brass |
||
|
Production technique |
Solid and then machined, hobbed, if need to have can also weld |
||
|
Heat treatment |
Hardening and Tempering, Higher Frequency Quenching, Carburizing Quenching |
||
|
Area remedy |
Oxide black, Galvanized, Nickel plated, Chrome plated,Painted and so on |
||
|
Model |
ANSI: 25/35/forty one/40/fifty/60/80/one hundred/a hundred and twenty/140/160/one hundred eighty/two hundred/240 |
||
|
DIN/ISO:04C/06C/085/08A/10A/12A/16A/20A/24A/28A/32A/36A/40A/48A |
|||
|
DIN/ISO:04B/05B/06B/08B/10B/12B/16B/20B/24B/28B/32B/36B/40B/48B |
|||
|
Method |
Forging, Hobbing, Precision machining |
||
|
Teeth |
8T-100T |
||
|
Sort |
Type A sprockets :Plate (with no Hub) |
||
|
Type B sprockets:1 aspect with hub |
|||
|
Sort C sprockets: Double aspect with hub |
|||
|
Concluded bore sprockets:With the inner gap ,keyway and screw |
|||
1.Quickly supply: Normal products can be shipped in as fast as 20 times
two.Great support: well timed reply, prompt quotation, dependable for the item
3.Higher value performance: can maintain cost stability for a specified time period of time, bringing greater revenue to clients
four.Excellent high quality: generation and testing have corresponding supervision to make sure solution top quality and get higher praise from buyers
five.OEM service: merchandise can be tailored in accordance to drawings and demands
We are dependable for the purchased goods. We are quite self-confident in the merchandise we generate. Of program, if you have any troubles following obtaining the merchandise, you can get in touch with us directly. We will validate and negotiate in time to remedy your troubles.
Drum sprockets: These sprockets are normally broader to boost the all round floor get in touch with in between the sprocket and chain. This lowers stress on both sections, creating a far more durable method for large haul conveyors.
Above time, the sprocket teeth wear out thanks to friction induced by the consistent physical contact in between the sprocket tooth and the sprocket. ep manufactures intelligent tooth sprockets with put on indicator pins. These visible wear indicators notify operators and inspectors when sprockets are still operating properly and when they need to have to be replaced.
China supplier Good Quality 08b 60b Machinery Coveyor Industrial Idler Chain Sprocket with Free Design Custom
Item Description
|
Company type |
Producer & Exporter |
||
|
Primary export marketplace |
Europe, North and South The usa, Southeast Asia, Oceania, Center East, Africa |
||
|
Material |
Alloy Steel, Carbon Steel, Stainless Steel,Aluminum, Copper, Brass |
||
|
Producing strategy |
Solid and then machined, hobbed, if want can also weld |
||
|
Heat treatment method |
Hardening and Tempering, Substantial Frequency Quenching, Carburizing Quenching |
||
|
Surface treatment method |
Oxide black, Galvanized, Nickel plated, Chrome plated,Painted and so on |
||
|
Model |
ANSI: 25/35/41/forty/50/60/80/100/a hundred and twenty/a hundred and forty/one hundred sixty/a hundred and eighty/200/240 |
||
|
DIN/ISO:04C/06C/085/08A/10A/12A/16A/20A/24A/28A/32A/36A/40A/48A |
|||
|
DIN/ISO:04B/05B/06B/08B/10B/12B/16B/20B/24B/28B/32B/36B/40B/48B |
|||
|
Method |
Forging, Hobbing, Precision machining |
||
|
Tooth |
8T-100T |
||
|
Sort |
Variety A sprockets :Plate (with out Hub) |
||
|
Sort B sprockets:One facet with hub |
|||
|
Type C sprockets: Double facet with hub |
|||
|
Concluded bore sprockets:With the internal hole ,keyway and screw |
|||
one.Quick shipping: Normal items can be sent in as fast as twenty times
2.Excellent service: timely reply, prompt quotation, accountable for the merchandise
three.High expense overall performance: can preserve value balance for a particular period of time of time, bringing better profits to buyers
four.Great top quality: generation and testing have corresponding supervision to make sure product high quality and get substantial praise from consumers
five.OEM support: products can be personalized according to drawings and needs
We are dependable for the requested products. We are really assured in the products we create. Of program, if you have any troubles right after receiving the products, you can get in touch with us right. We will affirm and negotiate in time to solve your troubles.
More than time, the sprocket enamel dress in out thanks to friction triggered by the constant actual physical speak to among the sprocket tooth and the sprocket. ep manufactures smart tooth sprockets with put on indicator pins. These visual put on indicators notify operators and inspectors when sprockets are nevertheless doing work properly and when they need to have to be replaced.
Bushing Sprockets: Bushing sprockets can simplify chain method routine maintenance by changing only worn sprocket assemblies, although the bushings can even now be reused. The bushing also has a tightly tapered mating surface that can transmit larger torques than basic essential components. Near-fitting surfaces give better performance in programs with heavy commence/quit operations or shock hundreds.
in Herat Afghanistan sales price shop near me near me shop factory supplier Farm Machinery Bevel Gears and Sprocket manufacturer best Cost Custom Cheap wholesaler
We offer OEM support. we are confident to supply our consumers adaptable and diversified services. In 2000, EPG took the lead in attaining ISO14001 setting management certification and thereafter handed the inspection of clear production and recycling economic climate, successful the title of “Zhejiang Eco-friendly Organization”.
Q:What`s the MOQ of your goods?
A:one established,we can also deal with the sample order. and the massive-quantity.
Q:How could i know if the item ideal for my EPTT?
A:Our income will get in touch with with you to make positive the particular dimension,data and other EPTTant details of your aimed merchandise.We make sure all the items match for your EPTT.
Q:I want to uncover a new provider for goods,can you?
A:Sure,we can supply the EPTT working day support for your consulting,we intention at getting your most EPTTant provider.
Q:What`s the payment terms of the purchase?
A:As your requirement,we can acknowledge numerous kinds of payment terms.
China manufacturer & factory supplier for Gearbox in Santiago Chile for Agricultural Machinery Rotary Mower Gearboxes With high quality best price & service
Normal solitary-strand roller chain, standardized by ASME, is an assembly of alternating pin links and roller hyperlinks. The length between pin facilities is named the pitch. The pitch is what categorizes the size of the chain. The larger the pitch, the greater the load ranking. Chains with little pitches carry scaled-down loads, work far more quietly, and at larger speeds. Multi-strand, little-pitch roller chains are a very good answer for high-load, higher-pace applications.The merchandise effectively displays environmental defense and energy preserving.
Overview
Fast Specifics
- Applicable Industries:
-
Production Plant, Equipment Fix Shops, Farms
- Place of Origin:Zhejiang, China
- Brand Identify:
-
OEM
- Gearing ArrangemeAs an R&D driven company, we try to produce drive options that carefully meetnt:
-
Bevel / Miter
- Output Torque:
-
-10000NM
- Input Speed:
-
540
- Output Pace:
-
180-1080
- Product title:
-
Rotary Mower Gearboxes
- Application:
-
Agricultural Equipment
Supply Ability
- Provide Potential:
- 2000 Piece/Items for every Month
Packaging & Delivery
- Packaging Particulars
- Wood Scenario
- Port
- Shanghai/ Ningbo
- Image Instance:
-
-
Direct Time
: -
Quantity(Items) one – 2000 >2000 Est. Time(days) 50 To be negotiated
On-line Customization
Solution Description
Gearbox for Agricultural Machinery Rotary Mower Gearboxes
If you might be seeking for rotary mower parts, you’ve arrive to the correct spot. HZPT has a broad variety of the best makes to match your specific mower and any tough process you need to have to tackle. Search our assortment to learn your several options in these essential components to keep life on the farm working efficiently.
|
Technological parameters |
Depth |
|
Brand Name: |
HZPT |
|
Product Number: We get a great deal of questions surrounding PTO shafts and how to connect them to your tractor. In today’s put up, we’ll go over the basics of PTO, PTO Shafts, and PTO adapters for your tractor mounted implements. PTO stands for “Power Just take-Off” and is the main mechanism for supplying energy to an attachment or apply (such as a flail mower) by way of PTO shaft.By delivering rotational energy by way of the driveshaft (or cardan shaft) a assortment of tractor mounted implements can be operated by little and mid-sized tractors. |
EP70 |
|
Gearing Arrangement: |
Bevel I Miter |
|
Output Torque: |
539Nm |
|
Rated Power: |
80hp80hp |
|
InpuUnder the advice of managerial perception of “Serving agriculture, scoring a achievement through quality of merchandise and honesty in business”, our items have been trusted by clientele and have acquired a more substantial share of marketplace.t Speed: |
540rpm |
|
Output Pace: |
1036rpm |
|
Ratio: |
1:1.92 |
|
Module: |
six.five |
|
Input description: |
spline shaft |
|
Output description: |
Crucial way shaft |
|
Housing substance: |
QT450 |
|
Shaft materials: |
20CrMnTi |
|
Horsing surface area coloration: |
custom-made |
|
Weight: |
37kg |
|
Input torque: |
1040Nm |
Associated Goods
|
Gearbox For Rotary Tiller |
Gearbox For Fertiliser Spreaders |
Agricultural Gearbox For HAY TEDDER |
|
Agricultural Gearbox For Rotary Cutter |
Gearbox For Rotary Mowers |
Agricultural Pto Gearboxes For Powered Generator |
|
Publish Gap Digger Gearbox |
Gearbox For Self Loading Trailer |
General Gearbox For Agricultural Equipment |
|
Agricultural Gearbox For Manure Spreader |
Gearboxes For Silo Distributors Method |
Driveline Motor Of Irrigation Technique |
|
Agricultural Gearbox For Fertilizer Spreader |
Hay Choppers Gearboxes |
Driveline Gearbox Of Irrigation Technique |
|
Agricultural Gearbox For Sprayers |
Gearboxes For Balers |
Middle-Dive Equipment Box Of Irrigation Technique |
|
Agricultural Gearbox For Flail Mower |
Gearboxes Multiplier For Hydraulic Pump Technique |
Hydraulic PTO Push Gearbox Velocity Increaser |
|
Agricultural Gearbox For Lawn Mowers |
Planetary Gearbox For Hydraulic Push Digger In Line |
Facet-Shipping Rake Gearbox |
|
Agricultural Gearbox For Generator |
Agricultural Gearbox For Harvest Fruits |
Planetary Gearboxes For Feed Mixer |
|
Agricultural Gearbox For Micro Tiller |
Gearbox For Cattle Cleansing |
PTO speed reducer |
|
Agricultural Gearbox For Concrete Mixer |
Gearbox For Digger Generate |
Slasher gearboxes |
|
Agricultural Gearbox For Feed Mixer |
Gearbox For Dryer Push System |
Auger Gearboxes |
|
Agitators For Sewage |
Gearbox For Lagoon Pumps |
Grain Harvester Reversing Gearbox |
|
Salt Spreader Gearboxes |
Bevel Gearbox For Biogas Energy Generator Plant |
Oil-Pump-Gearbox |
|
Gearbox reducer for Weather screens travel system |
Gearbox For Round Noticed And Belt Saws |
Potato Harvester Gearbox |
|
Gearbox And Reducer For Crop Storage Push Methods |
Gearbox For Snow Tillers |
Pesticide Sprayer Gearbox |
|
Gearbox Reducer For Horticulture Push Programs |
Gearbox For Concrete Mixers |
Chain Sprockets Gearbox |
|
Generate Systems For Air flow In Livestock Farming |
Worm Equipment Slewing Travel For Timber Get |
Agricultural Gearbox Grain Conveyor Gearbox |
|
Electric Film Reeler Roll Up Models Winch For Poly Movie Greenhouse Air flow |
Agriculture Gearbox For Rotary Harrows |
Harvester Gearbox Reversing Bevel Gearbox |
|
Rotary Harrows Gearbox |
Agricultural Gearbox For Winery |
Reversing Gearbox |
|
Rotary Cultivators Gearbox |
Agricultural Gearbox For Weed Mowers |
Rotary Mower Gearboxes Dimensions EP70 |
|
Gearbox For Trenchers |
Agricultural Gearbox For Offset Mowers |
Poultry and Pig Geared Motors For Feeding Programs |
|
Interpump Gearbox For PTO Push |
Agricultural Gearbox For Flail Mowers |
Salt Spreader Sprocket Chain Gearbox |
|
Gearbox For Dusters |
Our Firm
At any time-power expert in creating all sorts of mechanical transmission and hydraulic transmission like: planetary gearboxes, worm gearboxes, in-line helical equipment speed reducers, parallel shaft helical gear reducers, helical bevel reducers, helical worm equipment reducers, agricultural gearboxes, tractor gearboxes, vehicle gearboxes, pto generate shafts, unique reducer & connected gear factors and other associated items, sprockets, hydraulic system, vaccum pumps, fluid coupling, gear racks, chains, timing pulleys, udl pace variators, v pulleys, hydraulic cylinder, gear pumps, screw air compressors, shaft collars lower backlash worm gearboxes and so on. in addition, we can generate personalized variators, geared motors, electric motors and other hydraulic merchandise according to customers’ drawings.
The company provides a reputable gurantee for the product’ s top quality by advanced inspection and screening gear. professional technical crew, exquisite processing engineering and stringent control method.
In latest several years, the business has been establishing quickly by its abundant encounter in production, adcanced managemant technique, standardized administration technique, sturdy specialized force. We constantly adhere the notion of survial by high quality, and decelopment by innovation in science and technology.
Ever-power Group is willing to operate with you hand in hand and produce brilliance collectively!
Grinding Workshop
CNC Enamel Device
CNC Lathe Workshop
Figuring Heart
CNC Workshop
Warmth Remedy Equipment
3D Measurement Equipment
Equipment Teeth Profile Examination Devices
Materials offered
Lower carbon metal, C45, 20CrMnTi, 42CrMo, 40Cr, stainless steel. Can be tailored relating to consumer requirements.
Area remedy
Blacking, galvanization, chroming, electrophoresis, colour portray, …
Warmth therapy
High frequency quenching heat treatment method, hardened enamel, carbonizing, nitride, …
Certifications
FAQ
Q: Are you trading company or company ?
A: Our team is made up in 3 factories and 2 overseas income firms.
Q: Do you offer samples ? is it totally free or added ?
A: Indeed, we could offer the sample for free of charge demand but do not shell out the expense of freight.
Q: How prolonged is your shipping time ? What is your conditions of payment ?
A: Normally it is forty-45 days. The time may possibly vary based on the item and the stage of customization. For regular merchandise, the payment is: 30% T/T in advance ,equilibrium ahead of shippment.
Q: What is the exact MOQ or price for your solution ?
A: As an OEM firm, we can supply and adapt our goods to a broad variety of requirements.Thus, MOQ and price tag may possibly tremendously vary with size, materials and more specs For instance, costly products or standard products will generally have a reduced MOQ. Please get in touch with us with all relevant particulars to get the most exact quotation.
If you have an additional concern, please come to feel cost-free to speak to us.
Packing & Supply
Providers
Also I would like to consider this opportunity to give a transient introduction of our At any time-Electrical power company:
Our organization is a popular manufacturer of agriculture gearbox,worm lessen gearbox, PTO shafts, Sprockets ,rollar chains, bevel equipment, pulleys and racks in china.
We have exported numerous items to our clients all over the entire world, we have lengthy-time knowledge and robust technologies assistance.
Some of our consumer :
Italy: COMER,GB GEABOX ,SATI, CHIARAVALLI, AMA , Brevini
Germany: SILOKING ,GKN ,KTS
France: Itfran, Sedies
Brazil: AEMCO ,STU
Usa: John Deere , BLOUNT, Weasler, Agco, Omni Gear, WOODS
Canada: JAY-LOR , CANIMEX ,RingBall
……
-Ø Our Organization with above twelve year’s historical past and 1000 staff and twenty income.
-Ø With over a hundred Million USD income in 2017
-Ø With progress equipment equipments
-Ø With big function potential and substantial high quality handle, ISO certified.
……
you also can check our site to know for much more information, if you require our items catalogue, make sure you contact with us.
