Tag Archives: plastic chain sprocket

China factory Welded Metric Roller Drive Conveyor Chain CZPT Plastic Stainless Steel Duplex Cast Iron Plate Flat Top Finished Bore Idler Bushed Taper Lock Qd Sprocket

Product Description

Welded Metric Roller Drive Conveyor Chain CZPT Plastic Stainless Steel Duplex Cast Iron Plate Flat Top Finished Bore Idler Bushed Taper Lock Qd Sprocket

Standard sprockets:

European standard sprockets

DIN stock bore sprockets & plateheels

03B-1 04B-1 05B-1-2 06B-1-2-3 081B-1 083B-1/084B-1 085B-1 086B-1 08B-1-2-3 10B-1-2-3 12B-1-2-3 16B-1-2-3 20B-1-2-3 24B-1-2-3
28B-1-2-3 32B-1-2-3

03A-1 04A-1 05A-1-2 06A-1-2-3 081A-1 083A-1/084A-1 085A-1 086A-1 08A-1-2-3 10A-1-2-3 12A-1-2-3 16A-1-2-3 20A-1-2-3 24A-1-2-3
28A-1-2-3 32A-1-2-3

DIN finished bore sprockets

06B-1 08B-1 10B-1 12B-1 16B-1 20B-1

stainless steel sprockets

06B-1 08B-1 10B-1 12B-1 16B-1

taper bore sprockets

3/8″×7/32″ 1/2″×5/16″ 5/8″×3/8″ 3/4″×7/16″ 1″×17.02mm 1 1/4″×3/4″

cast iron sprockets

06B-1-2-3 081B-1 083B-1/084B-1 085B-1 086B-1 08B-1-2-3 10B-1-2-3 12B-1-2-3 16B-1-2-3 20B-1-2-3 24B-1-2-3

platewheels for conveyor chain

20×16mm 30×17.02mm P50 P75 P100

table top wheels

P38.1

idler sprockets with ball bearing

8×1/8″ 3/8″×7/32″ 1/2″×1/8″ 1/2″×3/16″ 1/2″×5/16″ 5/8″×3/8″ 5/8″×3/8″ 5/8″×3/8″ 3/4″×7/16″ 3/4″×7/16″ 1″×17.02mm 1 1/4″×3/4″

double simplex sprockets

06B-1 08B-1 10B-1 12B-1 16B-1

American standard sprockets

ASA stock bore sprockets

-2 35-3 -2 40-3 50 50-2-50-3 60 60-2 60-3 80-80-2 80-3 100 100-2 100-3 120 120-2 120-3 140 140-2 160 160-2 180 200
200-2 240

finished bore sprockets

stainless steel sprockets

60

double single sprockets&single type Csprockets

taper bore sprockets

35 35-2 -2 50 50-2 60 60-2 80 80-2

double pitch sprockets

2040/2042 2050/2052 2060/2062 2080/2082

sprockets with split taper bushings

40-2 40-3 50 50-2 50-3 60 60-2 60-3 80 80-2 80-3 100 100-2 120 120-2

sprockets with QD bushings

35 35-1 35-2 -2 40-3 50 50-2 50-3 60 60-2 60-3 80 80-2 80-3 100 100-2 100-3

Japan standard sprockets

JIS stock sprockets

140 160

finished bore sprockets

FB25B FB35B FB40B FB50B FB60B FB80B FB100B FB120B

double single sprockets

40SD 50SD 60SD 80SD 100SD

double pitch sprockets

speed-ratio sprockets

C3B9N C3B10N C4B10N C4B11 C4B12 C5B10N C5B11 C5B12N C6B10N C6B11 C6B12

idler sprockets

35BB20H 40BB17H 40BB18H 50BB15H 50BB17H 60BB13H 60BB15H 80BB12H

table top sprockets

P38.1

 

Customization process :

1.Provide documentation: CAD, DWG, DXF, PDF,3D model ,STEP, IGS, PRT
2.Quote: We will give you the best price within 24 hours
3.Place an order: Confirm the cooperation details and CZPT the contract, and provide the labeling service
4.Processing and customization: Short delivery time

Related products:

 

Our Factory

If you need to customize transmission products,
please click here to contact us!

Chain Sprockets:

 

Company Information:

 

 

 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear
Toothed Portion Shape: Spur Gear
Material: Custom Made
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

conveyor sprocket

Safety Considerations when Working with Conveyor Sprockets

Working with conveyor sprockets involves potential hazards, and it’s crucial to implement proper safety measures to prevent accidents and ensure the well-being of workers. Here are some important safety considerations:

1. Lockout-Tagout (LOTO): Before performing any maintenance or repairs on conveyor systems, ensure proper LOTO procedures are followed. This prevents unexpected startup and movement of the conveyor, which can cause severe injuries.

2. Guarding: Install adequate guards around the conveyor sprockets to prevent accidental contact with moving parts. Guards should be securely in place and not interfere with the conveyor’s operation.

3. Personal Protective Equipment (PPE): Workers handling conveyor sprockets should wear appropriate PPE, including safety glasses, gloves, and steel-toed shoes, to protect against potential hazards.

4. Training: Provide comprehensive training to all personnel involved in operating, maintaining, or troubleshooting conveyor systems. Training should cover safe practices, emergency procedures, and proper use of tools and equipment.

5. Regular Inspections: Conduct routine inspections of conveyor sprockets and chains to identify any signs of wear, misalignment, or damage. Address any issues promptly to prevent safety hazards.

6. Lubrication: Apply lubricants as per the manufacturer’s recommendations to reduce friction and ensure smooth operation. However, ensure that lubricants are applied safely and do not create slippery surfaces.

7. Weight Capacity: Adhere to the weight capacity limits of conveyor systems to avoid overloading, which can lead to sprocket failure and pose safety risks.

8. Hazardous Environments: In hazardous environments, such as those with flammable materials or explosive atmospheres, use specialized conveyor components that comply with safety standards for such conditions.

9. Emergency Stop Buttons: Install easily accessible emergency stop buttons along the conveyor system’s length to immediately halt operation in case of emergencies.

10. Regular Maintenance: Follow a preventive maintenance schedule to keep conveyor sprockets in good condition and reduce the likelihood of sudden failures.

By prioritizing safety and implementing these considerations, you can minimize the risks associated with working with conveyor sprockets and ensure a safe working environment for all personnel.

conveyor sprocket

How do I identify the signs of wear and fatigue in conveyor sprockets, and when should they be replaced?

Identifying signs of wear and fatigue in conveyor sprockets is crucial to ensure safe and efficient conveyor operation. Here are some common indicators that sprockets may need to be replaced:

  • 1. **Tooth Wear:** Examine the teeth of the sprockets regularly. If you notice a significant reduction in tooth height or sharpness, it indicates wear. Worn teeth can cause chain or belt slippage, leading to inefficient conveyor operation.
  • 2. **Deformed or Damaged Teeth:** Look for any signs of deformation, chipping, or cracking on the sprocket teeth. Damaged teeth can lead to chain or belt skipping and may cause damage to the entire conveyor system.
  • 3. **Chain or Belt Skipping:** If you observe the chain or belt skipping or jumping off the sprocket during operation, it is a clear sign of sprocket wear or misalignment.
  • 4. **Excessive Noise:** Unusual noise during conveyor operation, such as grinding or rattling, may indicate sprocket wear or misalignment.
  • 5. **Excessive Vibration:** Excessive vibration in the conveyor system can be a result of worn sprockets, causing the chain or belt to operate unevenly.
  • 6. **Visible Cracks or Breaks:** Inspect the sprockets for any visible cracks or breaks. Cracked or broken sprockets can lead to sudden failure and pose safety hazards.

Regular maintenance and inspection are essential to identify these signs early. Depending on the severity of wear and the level of usage, sprockets may need to be replaced when any of these signs are detected. Timely replacement of worn sprockets can prevent costly downtime, reduce the risk of conveyor failure, and extend the overall lifespan of the conveyor system.

conveyor sprocket

Eco-Friendly Materials Used for Manufacturing Conveyor Sprockets

Yes, there are several eco-friendly materials used for manufacturing conveyor sprockets. As environmental concerns continue to grow, industries are increasingly focusing on sustainable and green manufacturing practices. Some of the eco-friendly materials used for conveyor sprockets include:

  • 1. Recycled Steel: Steel is a common material for conveyor sprockets, and using recycled steel helps reduce the demand for virgin steel production and lowers the carbon footprint.
  • 2. Cast Iron: Cast iron sprockets can also be considered eco-friendly as cast iron is a durable and long-lasting material that requires less frequent replacements, reducing waste generation.
  • 3. Non-Toxic Coatings: Some manufacturers use non-toxic and environmentally friendly coatings on sprockets to protect them from corrosion without harming the environment.
  • 4. Biodegradable Plastics: In certain applications, biodegradable plastics may be used as a material for sprockets, offering an eco-friendly alternative to conventional plastics.
  • 5. Sustainable Manufacturing Processes: Apart from material choices, eco-friendly conveyor sprockets can be produced using sustainable manufacturing practices that aim to minimize energy consumption and waste generation.

When selecting conveyor sprockets, it’s essential to inquire about the materials used in their construction and opt for those that prioritize sustainability. Choosing eco-friendly materials not only reduces the environmental impact but also promotes a greener and more sustainable industry.

China factory Welded Metric Roller Drive Conveyor Chain CZPT Plastic Stainless Steel Duplex Cast Iron Plate Flat Top Finished Bore Idler Bushed Taper Lock Qd Sprocket  China factory Welded Metric Roller Drive Conveyor Chain CZPT Plastic Stainless Steel Duplex Cast Iron Plate Flat Top Finished Bore Idler Bushed Taper Lock Qd Sprocket
editor by CX 2024-03-25

China best Welded Metric Roller Drive Conveyor Chain CZPT Plastic Stainless Steel Duplex Cast Iron Plate Flat Top Finished Bore Idler Bushed Taper Lock Qd Sprocket

Product Description

Welded Metric Roller Drive Conveyor Chain CZPT Plastic Stainless Steel Duplex Cast Iron Plate Flat Top Finished Bore Idler Bushed Taper Lock Qd Sprocket

Standard sprockets:

European standard sprockets

DIN stock bore sprockets & plateheels

03B-1 04B-1 05B-1-2 06B-1-2-3 081B-1 083B-1/084B-1 085B-1 086B-1 08B-1-2-3 10B-1-2-3 12B-1-2-3 16B-1-2-3 20B-1-2-3 24B-1-2-3
28B-1-2-3 32B-1-2-3

03A-1 04A-1 05A-1-2 06A-1-2-3 081A-1 083A-1/084A-1 085A-1 086A-1 08A-1-2-3 10A-1-2-3 12A-1-2-3 16A-1-2-3 20A-1-2-3 24A-1-2-3
28A-1-2-3 32A-1-2-3

DIN finished bore sprockets

06B-1 08B-1 10B-1 12B-1 16B-1 20B-1

stainless steel sprockets

06B-1 08B-1 10B-1 12B-1 16B-1

taper bore sprockets

3/8″×7/32″ 1/2″×5/16″ 5/8″×3/8″ 3/4″×7/16″ 1″×17.02mm 1 1/4″×3/4″

cast iron sprockets

06B-1-2-3 081B-1 083B-1/084B-1 085B-1 086B-1 08B-1-2-3 10B-1-2-3 12B-1-2-3 16B-1-2-3 20B-1-2-3 24B-1-2-3

platewheels for conveyor chain

20×16mm 30×17.02mm P50 P75 P100

table top wheels

P38.1

idler sprockets with ball bearing

8×1/8″ 3/8″×7/32″ 1/2″×1/8″ 1/2″×3/16″ 1/2″×5/16″ 5/8″×3/8″ 5/8″×3/8″ 5/8″×3/8″ 3/4″×7/16″ 3/4″×7/16″ 1″×17.02mm 1 1/4″×3/4″

double simplex sprockets

06B-1 08B-1 10B-1 12B-1 16B-1

American standard sprockets

ASA stock bore sprockets

-2 35-3 -2 40-3 50 50-2-50-3 60 60-2 60-3 80-80-2 80-3 100 100-2 100-3 120 120-2 120-3 140 140-2 160 160-2 180 200
200-2 240

finished bore sprockets

stainless steel sprockets

60

double single sprockets&single type Csprockets

taper bore sprockets

35 35-2 -2 50 50-2 60 60-2 80 80-2

double pitch sprockets

2040/2042 2050/2052 2060/2062 2080/2082

sprockets with split taper bushings

40-2 40-3 50 50-2 50-3 60 60-2 60-3 80 80-2 80-3 100 100-2 120 120-2

sprockets with QD bushings

35 35-1 35-2 -2 40-3 50 50-2 50-3 60 60-2 60-3 80 80-2 80-3 100 100-2 100-3

Japan standard sprockets

JIS stock sprockets

140 160

finished bore sprockets

FB25B FB35B FB40B FB50B FB60B FB80B FB100B FB120B

double single sprockets

40SD 50SD 60SD 80SD 100SD

double pitch sprockets

speed-ratio sprockets

C3B9N C3B10N C4B10N C4B11 C4B12 C5B10N C5B11 C5B12N C6B10N C6B11 C6B12

idler sprockets

35BB20H 40BB17H 40BB18H 50BB15H 50BB17H 60BB13H 60BB15H 80BB12H

table top sprockets

P38.1

 

Customization process :

1.Provide documentation: CAD, DWG, DXF, PDF,3D model ,STEP, IGS, PRT
2.Quote: We will give you the best price within 24 hours
3.Place an order: Confirm the cooperation details and CZPT the contract, and provide the labeling service
4.Processing and customization: Short delivery time

Related products:

 

Our Factory

If you need to customize transmission products,
please click here to contact us!

Chain Sprockets:

 

Company Information:

 

 

 

 

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear
Toothed Portion Shape: Spur Gear
Material: Custom Made
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

conveyor sprocket

Conveyor Sprockets in High-Load and High-Speed Conveyor Systems

Yes, conveyor sprockets can be used in high-load and high-speed conveyor systems. The design and construction of conveyor sprockets are critical factors in ensuring their performance under such demanding conditions.

High-Load Applications: Conveyor systems that handle heavy loads require sprockets made from durable materials with high load-carrying capacities. Steel and cast iron sprockets are commonly used in high-load applications due to their strength and resilience. For extreme loads, special alloy sprockets may be used to enhance load-carrying capabilities.

High-Speed Applications: In high-speed conveyor systems, sprocket rotational speed becomes a crucial consideration. The sprocket’s material, design, and balance are vital to prevent vibration, noise, and premature wear. Sprockets made from materials with excellent heat dissipation properties, such as steel or alloy, are preferred for high-speed applications.

Lubrication and Maintenance: Proper lubrication and regular maintenance are essential for conveyor sprockets in high-load and high-speed systems. Adequate lubrication reduces friction, wear, and heat generation, thereby extending the sprockets’ lifespan. Regular inspections help identify any signs of wear or damage, allowing for timely replacement and preventing costly breakdowns.

When using conveyor sprockets in high-load and high-speed systems, it’s crucial to consider factors such as the load requirements, rotational speed, material properties, and maintenance schedule to ensure reliable and efficient conveyor operation.

conveyor sprocket

How do I Calculate the Required Torque and Power for a Conveyor Sprocket Setup?

Calculating the required torque and power for a conveyor sprocket setup involves several factors related to the conveyor system’s design, load, and operating conditions. The torque and power requirements are essential to ensure that the conveyor system can efficiently handle the intended load and operate safely.

To calculate the required torque and power, follow these steps:

  1. Identify the Parameters: Gather information about the conveyor system, including the sprocket diameter, the conveyor’s rotational speed, the mass of the conveyed material per unit length, the conveyor’s inclination angle (if applicable), and any other relevant dimensions or operating conditions.
  2. Calculate the Belt or Chain Tension: Determine the tension in the conveyor belt or chain. The belt tension is crucial as it affects the torque required to rotate the sprockets.
  3. Calculate the Torque: Use the formula: Torque (Nm) = Belt Tension (N) * Radius of Sprocket (m)
  4. Account for Efficiency and Safety Factors: Consider efficiency and safety factors to ensure the conveyor can handle the maximum load without overloading the system.
  5. Calculate the Power: Use the formula: Power (W) = Torque (Nm) * Angular Speed of Sprocket (rad/s)

It is essential to ensure that the calculated torque and power values are within the capability of the conveyor’s motor and drive system. Oversizing the motor and drive can lead to unnecessary energy consumption, while undersizing may result in conveyor performance issues or system failures.

Consulting with a qualified engineer or conveyor specialist is recommended to perform the calculations accurately and consider all relevant factors for the specific conveyor sprocket setup.

conveyor sprocket

How Do Conveyor Sprockets Interact with the Conveyor Chain or Belt?

Conveyor sprockets interact with the conveyor chain or belt through the engagement of their teeth with the gaps or links of the chain or the surface of the belt. The interaction between the sprockets and the chain/belt is a critical aspect of the conveyor system’s operation, as it determines how the power is transmitted and the movement of materials along the conveyor path.

The process of interaction between the conveyor sprockets and the chain/belt can be described as follows:

  • Chain Engagement: In chain conveyor systems, the teeth of the sprocket mesh with the gaps or links of the conveyor chain. As the sprocket rotates, it pulls the chain along with it, causing the conveyor chain to move and carry materials along the conveyor path.
  • Belt Friction: In belt conveyor systems, the conveyor belt makes direct contact with the surface of the sprocket. The friction between the belt and the sprocket surface allows the sprocket to drive the belt and move materials on the conveyor.
  • Positive Power Transmission: The engagement between the sprockets and the chain/belt provides positive power transmission, meaning there is no slippage between the sprockets and the conveyor components. This ensures efficient and reliable movement of materials without any loss of power.
  • Tensioning: The interaction between the sprockets and the chain/belt helps to maintain proper tension in the conveyor system. Tension is crucial to prevent slack in the chain/belt and to ensure smooth and consistent material handling.
  • Directional Control: The design and arrangement of the sprockets and the chain/belt determine the direction of material movement on the conveyor. By using different sprocket configurations, the conveyor system can be designed to move materials in various directions along the conveyor path.

It’s important to note that proper alignment and tensioning of the conveyor sprockets and the chain/belt are essential for optimal performance and longevity of the conveyor system. Misalignment or improper tension can lead to premature wear, increased power consumption, and potential conveyor system failures.

In summary, the interaction between conveyor sprockets and the conveyor chain/belt is a fundamental mechanism that enables power transmission and efficient material movement in conveyor systems.

China best Welded Metric Roller Drive Conveyor Chain CZPT Plastic Stainless Steel Duplex Cast Iron Plate Flat Top Finished Bore Idler Bushed Taper Lock Qd Sprocket  China best Welded Metric Roller Drive Conveyor Chain CZPT Plastic Stainless Steel Duplex Cast Iron Plate Flat Top Finished Bore Idler Bushed Taper Lock Qd Sprocket
editor by CX 2023-09-22

China Best Sales Welded Metric Roller Drive Conveyor Chain CZPT Plastic Stainless Steel Duplex Cast Iron Plate Flat Top Finished Bore Idler Bushed Taper Lock Qd Sprocket

Product Description

Welded Metric Roller Drive Conveyor Chain CZPT Plastic Stainless Steel Duplex Cast Iron Plate Flat Top Finished Bore Idler Bushed Taper Lock Qd Sprocket

Standard sprockets:

European standard sprockets

DIN stock bore sprockets & plateheels

03B-1 04B-1 05B-1-2 06B-1-2-3 081B-1 083B-1/084B-1 085B-1 086B-1 08B-1-2-3 10B-1-2-3 12B-1-2-3 16B-1-2-3 20B-1-2-3 24B-1-2-3
28B-1-2-3 32B-1-2-3

03A-1 04A-1 05A-1-2 06A-1-2-3 081A-1 083A-1/084A-1 085A-1 086A-1 08A-1-2-3 10A-1-2-3 12A-1-2-3 16A-1-2-3 20A-1-2-3 24A-1-2-3
28A-1-2-3 32A-1-2-3

DIN finished bore sprockets

06B-1 08B-1 10B-1 12B-1 16B-1 20B-1

stainless steel sprockets

06B-1 08B-1 10B-1 12B-1 16B-1

taper bore sprockets

3/8″×7/32″ 1/2″×5/16″ 5/8″×3/8″ 3/4″×7/16″ 1″×17.02mm 1 1/4″×3/4″

cast iron sprockets

06B-1-2-3 081B-1 083B-1/084B-1 085B-1 086B-1 08B-1-2-3 10B-1-2-3 12B-1-2-3 16B-1-2-3 20B-1-2-3 24B-1-2-3

platewheels for conveyor chain

20×16mm 30×17.02mm P50 P75 P100

table top wheels

P38.1

idler sprockets with ball bearing

8×1/8″ 3/8″×7/32″ 1/2″×1/8″ 1/2″×3/16″ 1/2″×5/16″ 5/8″×3/8″ 5/8″×3/8″ 5/8″×3/8″ 3/4″×7/16″ 3/4″×7/16″ 1″×17.02mm 1 1/4″×3/4″

double simplex sprockets

06B-1 08B-1 10B-1 12B-1 16B-1

American standard sprockets

ASA stock bore sprockets

-2 35-3 -2 40-3 50 50-2-50-3 60 60-2 60-3 80-80-2 80-3 100 100-2 100-3 120 120-2 120-3 140 140-2 160 160-2 180 200
200-2 240

finished bore sprockets

stainless steel sprockets

60

double single sprockets&single type Csprockets

taper bore sprockets

35 35-2 -2 50 50-2 60 60-2 80 80-2

double pitch sprockets

2040/2042 2050/2052 2060/2062 2080/2082

sprockets with split taper bushings

40-2 40-3 50 50-2 50-3 60 60-2 60-3 80 80-2 80-3 100 100-2 120 120-2

sprockets with QD bushings

35 35-1 35-2 -2 40-3 50 50-2 50-3 60 60-2 60-3 80 80-2 80-3 100 100-2 100-3

Japan standard sprockets

JIS stock sprockets

140 160

finished bore sprockets

FB25B FB35B FB40B FB50B FB60B FB80B FB100B FB120B

double single sprockets

40SD 50SD 60SD 80SD 100SD

double pitch sprockets

speed-ratio sprockets

C3B9N C3B10N C4B10N C4B11 C4B12 C5B10N C5B11 C5B12N C6B10N C6B11 C6B12

idler sprockets

35BB20H 40BB17H 40BB18H 50BB15H 50BB17H 60BB13H 60BB15H 80BB12H

table top sprockets

P38.1

 

Customization process :

1.Provide documentation: CAD, DWG, DXF, PDF,3D model ,STEP, IGS, PRT
2.Quote: We will give you the best price within 24 hours
3.Place an order: Confirm the cooperation details and CZPT the contract, and provide the labeling service
4.Processing and customization: Short delivery time

Related products:

 

Our Factory

If you need to customize transmission products,
please click here to contact us!

Chain Sprockets:

 

Company Information:

 

 

 

 

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear
Toothed Portion Shape: Spur Gear
Material: Custom Made
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

conveyor sprocket

Troubleshooting Conveyor Sprocket Issues

Conveyor sprockets are critical components in a conveyor system, and issues with them can lead to disruptions in material handling processes. Here are some common problems that may arise with conveyor sprockets and how to troubleshoot them:

  1. Excessive Wear: If the sprocket teeth are showing signs of excessive wear, it may be due to a misalignment issue. Check for misalignment between the sprocket and the conveyor chain or belt. Correct any misalignment and ensure that the sprocket is properly aligned with the conveyor.
  2. Sprocket Teeth Damage: Damage to the sprocket teeth can be caused by foreign objects or debris caught between the chain links and sprocket teeth. Inspect the sprocket regularly for any debris buildup, and clean it if necessary. Additionally, consider implementing measures to prevent foreign objects from entering the conveyor system.
  3. Chain Jumping or Slippage: Chain jumping or slippage can be caused by insufficient tension in the conveyor chain. Check the tension of the chain and adjust it to the recommended specifications provided by the conveyor manufacturer. Also, examine the sprocket teeth for signs of wear or damage that may be contributing to the issue.
  4. Excessive Noise or Vibration: Excessive noise or vibration may indicate misalignment, worn sprocket teeth, or loose mounting. Inspect the sprocket and conveyor components for any signs of wear, misalignment, or damage. Tighten any loose mounting bolts and make necessary adjustments to reduce noise and vibration.
  5. Corrosion or Rust: In humid or corrosive environments, sprockets may be prone to rust and corrosion. Consider using sprockets made from corrosion-resistant materials, such as stainless steel or plastic, in such environments. Regularly inspect and maintain the sprockets to prevent corrosion buildup.

It’s essential to perform routine maintenance and inspections of conveyor sprockets to identify and address potential issues early on. By troubleshooting and resolving problems promptly, you can ensure the smooth and efficient operation of your conveyor system, leading to increased productivity and reduced downtime.

conveyor sprocket

How do I identify the signs of wear and fatigue in conveyor sprockets, and when should they be replaced?

Identifying signs of wear and fatigue in conveyor sprockets is crucial to ensure safe and efficient conveyor operation. Here are some common indicators that sprockets may need to be replaced:

  • 1. **Tooth Wear:** Examine the teeth of the sprockets regularly. If you notice a significant reduction in tooth height or sharpness, it indicates wear. Worn teeth can cause chain or belt slippage, leading to inefficient conveyor operation.
  • 2. **Deformed or Damaged Teeth:** Look for any signs of deformation, chipping, or cracking on the sprocket teeth. Damaged teeth can lead to chain or belt skipping and may cause damage to the entire conveyor system.
  • 3. **Chain or Belt Skipping:** If you observe the chain or belt skipping or jumping off the sprocket during operation, it is a clear sign of sprocket wear or misalignment.
  • 4. **Excessive Noise:** Unusual noise during conveyor operation, such as grinding or rattling, may indicate sprocket wear or misalignment.
  • 5. **Excessive Vibration:** Excessive vibration in the conveyor system can be a result of worn sprockets, causing the chain or belt to operate unevenly.
  • 6. **Visible Cracks or Breaks:** Inspect the sprockets for any visible cracks or breaks. Cracked or broken sprockets can lead to sudden failure and pose safety hazards.

Regular maintenance and inspection are essential to identify these signs early. Depending on the severity of wear and the level of usage, sprockets may need to be replaced when any of these signs are detected. Timely replacement of worn sprockets can prevent costly downtime, reduce the risk of conveyor failure, and extend the overall lifespan of the conveyor system.

conveyor sprocket

Common Applications of Conveyor Sprockets in Different Industries

Conveyor sprockets are widely used in various industries to facilitate the movement of conveyor belts or chains. Some of the common applications of conveyor sprockets include:

  • 1. Material Handling: Conveyor systems with sprockets are extensively used in material handling industries such as manufacturing, logistics, warehouses, and distribution centers to transport goods and products efficiently.
  • 2. Food and Beverage: The food and beverage industry utilizes conveyor sprockets to move food products along the production line, from processing to packaging, ensuring smooth and hygienic material flow.
  • 3. Mining and Quarrying: Conveyor systems with sprockets are employed in mining and quarrying operations to transport raw materials, rocks, and minerals from one location to another for processing.
  • 4. Agriculture: In the agricultural sector, conveyor sprockets are used to move crops, grains, and other agricultural products through processing and storage facilities.
  • 5. Automotive: The automotive industry utilizes conveyor sprockets in assembly lines to move vehicle components and parts during the manufacturing process.
  • 6. Packaging: Conveyor systems with sprockets are extensively used in packaging industries to transport and package products efficiently and in an automated manner.
  • 7. Airport Baggage Handling: Conveyor sprockets play a vital role in airport baggage handling systems, ensuring passengers’ luggage is transported accurately and swiftly.
  • 8. Recycling: Conveyor systems with sprockets are used in recycling plants to sort and transport recyclable materials for processing and reuse.
  • 9. Pharmaceutical: The pharmaceutical industry utilizes conveyor sprockets to move medications and pharmaceutical products during the manufacturing and packaging process.
  • 10. Textile: In the textile industry, conveyor systems with sprockets are used to transport fabrics and textiles during various stages of production.

These are just a few examples, and conveyor sprockets find applications in many other industries where material handling and efficient movement of products or materials are essential for the production process.

China Best Sales Welded Metric Roller Drive Conveyor Chain CZPT Plastic Stainless Steel Duplex Cast Iron Plate Flat Top Finished Bore Idler Bushed Taper Lock Qd Sprocket  China Best Sales Welded Metric Roller Drive Conveyor Chain CZPT Plastic Stainless Steel Duplex Cast Iron Plate Flat Top Finished Bore Idler Bushed Taper Lock Qd Sprocket
editor by CX 2023-07-31

China factory Welded Metric Roller Drive Conveyor Chain CZPT Plastic Stainless Steel Duplex Cast Iron Plate Flat Top Finished Bore Idler Bushed Taper Lock Qd Sprocket

Product Description

Welded Metric Roller Drive Conveyor Chain CZPT Plastic Stainless Steel Duplex Cast Iron Plate Flat Top Finished Bore Idler Bushed Taper Lock Qd Sprocket

Standard sprockets:

European standard sprockets

DIN stock bore sprockets & plateheels

03B-1 04B-1 05B-1-2 06B-1-2-3 081B-1 083B-1/084B-1 085B-1 086B-1 08B-1-2-3 10B-1-2-3 12B-1-2-3 16B-1-2-3 20B-1-2-3 24B-1-2-3
28B-1-2-3 32B-1-2-3

03A-1 04A-1 05A-1-2 06A-1-2-3 081A-1 083A-1/084A-1 085A-1 086A-1 08A-1-2-3 10A-1-2-3 12A-1-2-3 16A-1-2-3 20A-1-2-3 24A-1-2-3
28A-1-2-3 32A-1-2-3

DIN finished bore sprockets

06B-1 08B-1 10B-1 12B-1 16B-1 20B-1

stainless steel sprockets

06B-1 08B-1 10B-1 12B-1 16B-1

taper bore sprockets

3/8″×7/32″ 1/2″×5/16″ 5/8″×3/8″ 3/4″×7/16″ 1″×17.02mm 1 1/4″×3/4″

cast iron sprockets

06B-1-2-3 081B-1 083B-1/084B-1 085B-1 086B-1 08B-1-2-3 10B-1-2-3 12B-1-2-3 16B-1-2-3 20B-1-2-3 24B-1-2-3

platewheels for conveyor chain

20×16mm 30×17.02mm P50 P75 P100

table top wheels

P38.1

idler sprockets with ball bearing

8×1/8″ 3/8″×7/32″ 1/2″×1/8″ 1/2″×3/16″ 1/2″×5/16″ 5/8″×3/8″ 5/8″×3/8″ 5/8″×3/8″ 3/4″×7/16″ 3/4″×7/16″ 1″×17.02mm 1 1/4″×3/4″

double simplex sprockets

06B-1 08B-1 10B-1 12B-1 16B-1

American standard sprockets

ASA stock bore sprockets

-2 35-3 -2 40-3 50 50-2-50-3 60 60-2 60-3 80-80-2 80-3 100 100-2 100-3 120 120-2 120-3 140 140-2 160 160-2 180 200
200-2 240

finished bore sprockets

stainless steel sprockets

60

double single sprockets&single type Csprockets

taper bore sprockets

35 35-2 -2 50 50-2 60 60-2 80 80-2

double pitch sprockets

2040/2042 2050/2052 2060/2062 2080/2082

sprockets with split taper bushings

40-2 40-3 50 50-2 50-3 60 60-2 60-3 80 80-2 80-3 100 100-2 120 120-2

sprockets with QD bushings

35 35-1 35-2 -2 40-3 50 50-2 50-3 60 60-2 60-3 80 80-2 80-3 100 100-2 100-3

Japan standard sprockets

JIS stock sprockets

140 160

finished bore sprockets

FB25B FB35B FB40B FB50B FB60B FB80B FB100B FB120B

double single sprockets

40SD 50SD 60SD 80SD 100SD

double pitch sprockets

speed-ratio sprockets

C3B9N C3B10N C4B10N C4B11 C4B12 C5B10N C5B11 C5B12N C6B10N C6B11 C6B12

idler sprockets

35BB20H 40BB17H 40BB18H 50BB15H 50BB17H 60BB13H 60BB15H 80BB12H

table top sprockets

P38.1

 

Customization process :

1.Provide documentation: CAD, DWG, DXF, PDF,3D model ,STEP, IGS, PRT
2.Quote: We will give you the best price within 24 hours
3.Place an order: Confirm the cooperation details and CZPT the contract, and provide the labeling service
4.Processing and customization: Short delivery time

Related products:

 

Our Factory

If you need to customize transmission products,
please click here to contact us!

Chain Sprockets:

 

Company Information:

 

 

 

 

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear
Toothed Portion Shape: Spur Gear
Material: Custom Made
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

conveyor sprocket

Signs of Wear and Tear in Conveyor Sprockets

Conveyor sprockets play a critical role in the smooth operation of a conveyor system. Over time, they can experience wear and tear due to the continuous movement and interaction with the conveyor chain or belt. It’s essential to identify signs of wear early to prevent further damage and maintain the efficiency of the conveyor system. Here are some common signs of wear and tear in conveyor sprockets:

  • Worn Teeth: Check the teeth of the sprocket for signs of wear. Worn teeth may appear shorter or have uneven surfaces compared to new sprockets.
  • Teeth Deformation: Inspect the teeth for any bending or deformation, which can be caused by excessive loads or impacts.
  • Missing Teeth: If any teeth are missing, it’s a clear indication that the sprocket needs replacement.
  • Chain Skipping: If the conveyor chain skips or jumps on the sprocket during operation, it suggests the sprocket is not engaging properly due to wear.
  • Chain Slippage: Excessive wear on the sprocket teeth can lead to chain slippage, resulting in inconsistent movement of materials.
  • Noise and Vibration: Unusual noise and vibration during conveyor operation can indicate sprocket wear or misalignment.
  • Visible Damage: Look for any visible signs of damage, such as cracks, chips, or breaks on the sprocket body or teeth.

Regular inspection of conveyor sprockets is crucial for detecting wear and tear early on. Inspect the sprockets as part of routine maintenance and pay attention to any changes in conveyor performance. If you notice any of the above signs of wear, it’s recommended to replace the sprockets promptly to avoid further damage and potential conveyor system failures.

conveyor sprocket

How do I prevent chain slippage and skipping issues with conveyor sprockets?

Chain slippage and skipping issues with conveyor sprockets can lead to disruptions in the conveyor system’s operation and negatively impact productivity. To prevent these problems, consider the following measures:

  • Proper Chain Tension: Ensuring the chain is appropriately tensioned is crucial. Too much tension can cause excessive wear, while too little tension can lead to chain slippage. Regularly check and adjust the chain tension to the manufacturer’s recommended specifications.
  • Correct Sprocket Alignment: Misaligned sprockets can cause the chain to ride up on the teeth and result in skipping. Check and align the sprockets to be in the same plane and parallel to the conveyor frame.
  • Regular Maintenance: Implement a routine maintenance schedule to inspect and clean the sprockets and chains. Remove any debris or buildup that can cause chain slippage.
  • Proper Lubrication: Lubrication is essential to reduce friction between the chain and sprockets. Use the appropriate lubricant and apply it regularly to ensure smooth operation and minimize wear.
  • Quality Sprockets: Invest in high-quality conveyor sprockets made from durable materials. Inferior sprockets can wear out quickly, leading to chain slippage and other issues.
  • Chain Maintenance: Regularly inspect the chain for signs of wear, elongation, or damaged links. Replace any damaged or worn-out chain sections promptly.
  • Proper Loading: Avoid overloading the conveyor, as excessive loads can put additional strain on the chain and sprockets, leading to slippage.

By implementing these preventive measures and conducting regular maintenance, you can significantly reduce the risk of chain slippage and skipping issues with conveyor sprockets, ensuring smooth and reliable conveyor system operation.

conveyor sprocket

Choosing the Right Size and Pitch of Conveyor Sprockets

Choosing the right size and pitch of conveyor sprockets is essential to ensure optimal performance and efficiency in your conveyor system. Here are the steps to guide you through the process:

  1. Identify the Conveyor Chain or Belt Type: Determine whether your conveyor system uses a roller chain, flat-top chain, modular belt, or any other type of chain or belt. Different types of chains or belts have specific requirements for sprocket size and pitch.
  2. Check the Manufacturer’s Specifications: Refer to the conveyor chain or belt manufacturer’s documentation to find the recommended sprocket specifications. This information typically includes the sprocket’s number of teeth, pitch diameter, and bore size.
  3. Calculate the Required Pitch Diameter: The pitch diameter is crucial for maintaining proper chain engagement. It is calculated using the chain’s pitch and the number of teeth on the sprocket. Pitch diameter = (Chain Pitch * Number of Teeth) / π
  4. Consider the Speed Ratio: The speed ratio between the sprockets in the conveyor system affects the chain’s speed and tension. Ensure that the sprocket’s pitch diameter and the speed ratio are suitable for your application.
  5. Account for the Conveyor System’s Load: Consider the weight and load-carrying capacity of the materials being transported on the conveyor. A heavier load may require a larger, more robust sprocket.
  6. Check the Shaft Size: Ensure that the conveyor sprocket’s bore size matches the diameter of your conveyor system’s shaft. Proper shaft fitment is essential for stable and secure sprocket mounting.
  7. Consult with Experts: If you’re unsure about the appropriate sprocket size and pitch for your conveyor system, don’t hesitate to seek advice from conveyor system experts or the sprocket manufacturer.

Choosing the right size and pitch of conveyor sprockets will contribute to the smooth operation and longevity of your conveyor system, minimizing wear and tear and ensuring efficient material handling.

China factory Welded Metric Roller Drive Conveyor Chain CZPT Plastic Stainless Steel Duplex Cast Iron Plate Flat Top Finished Bore Idler Bushed Taper Lock Qd Sprocket  China factory Welded Metric Roller Drive Conveyor Chain CZPT Plastic Stainless Steel Duplex Cast Iron Plate Flat Top Finished Bore Idler Bushed Taper Lock Qd Sprocket
editor by CX 2023-07-28

China 1260 Series High Quality Round Chain Injection Moulded Split Plastic Sprocket wholesaler

Warranty: 3 months
Relevant Industries: Foodstuff & Beverage Factory
Content: PA
Common: ISO9001:2015
Tooth number: 16/18
Coloration: Black
Merchandise identify: 1260 Series Chain Injection Moulded Plastic Sprocket
Construction: Break up
OEM: Yes
Type: Company
Port: ZheJiang
Processing: Injection moulded
Packing: In accordance to customer’s prerequisite
Application: Conveyor components
Packaging Details: +Carton containers for plastic belt, Yin Yang Pair Friendship Bracelets and necklace Handmade Tai Chi Charm Adjustable Rope Bracelets For Gifts slat chain or components. +Export picket boxes for conveyor machine. +Deal in accordance to customers’ requirements.
Port: ZheJiang port

1260 Series Large Quality Round Chain Injection Moulded Split Plastic Sprocket

SphericalNameModel no.No.of toothBore(mm)Pitch diameter(mm)Outdoors diameter(mm)Hub width(mm)
1260 Series sprocketSS1260-16-R301630130.2130.940
SS1260-sixteen-R3535
SS1260-sixteen-R40forty
SS1260-18-R3018thirty146.3146.8
SS1260-18-R3535
SS1260-18-R4040
SI1260-sixteen-R3016thirty130.two130.940
SI1260-sixteen-R3535
SI1260-16-R40forty
SI1260-eighteen-R3018thirty146.three146.eight
SI1260-18-R3535
SI1260-eighteen-R4040

Firm Details
Packaging & China Manufacturer Customise Manufacturing facility Price tag drive coupling pto shaft coupling travel shaft coupling adaptable jaw coupling Shipping and delivery
FAQ
Our Solutions

sprocket

Sprocket Basics

When it comes to sprockets, it’s important to understand the basics of design. This includes chain size and number of teeth. The number of teeth will vary depending on the type of chain and application. When determining the number of teeth, the angle between the teeth should be at least 360 degrees.

size

There are many factors to consider when choosing the correct sprocket size. The first thing to do is to determine if the sprocket is a double sprocket or a single sprocket. Also available in a variety of sizes. To determine the exact size, you should measure the distance between the grooves of the sprocket teeth and their opposite tooth slots. The distance between these two points is called the caliper diameter.
The size of the sprockets also varies depending on the type of chain. Large sprockets have arms, while smaller sprockets usually don’t. The arms reduce weight and inertia, making them more economical to operate. Some sprockets also have openings, which make them easier to assemble and disassemble. Some sprockets are also plated for a stronger construction. Some sprockets are manufactured with flame or induction hardened parts.
Sprockets are often used in conveyors, pallet conveyors and other conveying systems. The size of the sprocket should match the size of the chain. A caliper will help you determine if the sprocket has worn teeth. Another way to identify worn sprockets is to measure their diameter.
In addition to size, sprockets should have the correct pitch and center distance. This will help keep the roller chain taut. The chain should be clean and properly lubricated. There should be a small gap between the pin and bushing so that oil can pass through the sprocket and chain. In addition to this, the center-to-center distance between the chain and the sprocket should be at least 1.5 times the diameter of the sprocket.
The chain should have at least 17 teeth, which is common in the industry. Having smaller spacing will reduce mechanical losses and noise. However, larger sprocket sizes are best for applications with higher workloads.

Material

Sprockets are mechanical parts that mesh with the chain to move the chain. It is made of metal or reinforced plastic and usually resembles a gear. It is a gear design for a specific type of chain. Most sprocket and chain systems work the same way, although they vary in material and pitch.
There are three basic types of sprockets: single-strand, double-strand, and triple-strand. The length and number of teeth for each type are specified by various standards. For reference, the ISO-DIN standard is shown. Most sprockets are made of alloy steel and are case hardened and tempered in the tooth area. They also have a hub and a key for mounting.
Metal sprockets can be made of steel or aluminum alloys. While steel is a more durable material, aluminum sprockets are more attractive. Steel is the best material for long rides, while aluminum sprockets are better for casual riding.
In addition to automotive and industrial applications, sprockets are used in oil and gas, textile machinery, instrumentation and mechanical transmission. Many types of sprockets are interchangeable with each other. For added protection, they can also be galvanized to prevent rust. The main methods of galvanizing sprockets are hot-dip galvanizing and electro-galvanizing.
Sprockets are usually made of steel or aluminum. Their design is similar to that of gears, although they are more widely spaced than their counterparts. They can also span longer distances than gears, allowing them to be used for power transmission.
sprocket

Function

A chain drive is a common type of mechanical transmission in which sprockets are used to help reduce the speed of a moving object. Sprockets can have horizontal, vertical or inclined pitch and are usually used in pairs. The teeth of the sprocket mesh with the rollers on the drive chain, reducing the speed. These sprockets are usually made of metal, but can also be made of plastic or composite materials.
The role of the sprocket is to transmit motion from the output shaft of the engine to the rear wheels. For this, the front sprocket needs to rotate at the same speed as the engine output shaft. It can be mounted either on the drive track or on the front of the vehicle. A third sprocket can be connected to the drive track. In addition, the front sprocket is used to pull the drive chain. This will help transfer power from the engine to the rear wheels, allowing the motorcycle to travel forward. The side plates of the chain also help transmit chain tension.
The bushings are subjected to the tension applied to the chain as it passes through the sprockets thousands of times per minute. This puts pressure on the pin inside the bushing. Additionally, the pins must withstand bending and shearing forces transmitted from the plate to the bushing. The pins must also withstand impact and have high tensile strength. If the pin is worn, it will need to be replaced or repaired.
Sprockets power the chain-driven motion system and carry heavy loads. Proper selection of sprockets can prevent damage to your equipment. To do this, you need to select the appropriate sprocket based on the type of assembly and system specification.
sprocket

maintain

Sprocket maintenance is an important part of motorcycle maintenance. Failure to do so will result in frequent chain changes and additional costs. Regular maintenance of your chain will help ensure your chain will last 30,000 miles or more. By comparison, a poorly maintained chain only lasts 10,000 miles.
Checking the sprocket is very easy. First, remove the chain and align it. Next, check for any foreign objects. If you see a damaged sprocket, you need to replace it. If you can’t replace a worn sprocket, you can buy a new chain. However, the new chain will not last as long as the old one.
Check for signs of rust. Rust can form on the chain due to exposure to humidity and heat. When the pins or rollers get rusted, the seals are damaged. If the pins or rollers are rusted, it’s time to replace the chain.
Regular maintenance of the chain is important to prevent kinks and slippage. This can cause excessive wear on the sprockets and chain. If the teeth are worn, the chain will not be able to properly grip the sprocket, resulting in difficult shifting and severe vibration.
If your chain is several years old, it is important to lubricate it every few months to prevent rust. It is also important to clean the chain thoroughly before lubricating to keep it clean and lubricated. Non-petroleum-based cleaners can help remove grit that may have built up. If you use the chain for a long time, you will need to clean it every 300-600 miles.

China 1260 Series High Quality Round Chain Injection Moulded Split Plastic Sprocket     wholesaler China 1260 Series High Quality Round Chain Injection Moulded Split Plastic Sprocket     wholesaler
editor by Cx 2023-06-30

China 1260 Series High Quality Round Chain Injection Moulded Split Plastic Sprocket sprocket bike part

Warranty: 3 months
Relevant Industries: Foodstuff & Beverage Manufacturing facility
Material: PA
Normal: ISO9001:2015
Enamel quantity: sixteen/18
Colour: Black
Solution title: 1260 Collection Chain Injection Moulded Plastic Sprocket
Framework: Split
OEM: Sure
Sort: Manufacturer
Port: ZheJiang
Processing: Injection moulded
Packing: In accordance to customer’s requirement
Software: Conveyor components
Packaging Information: +Carton containers for plastic belt, Yin Yang Pair Friendship Bracelets and necklace Handmade Tai Chi Appeal Adjustable Rope Bracelets For Gifts slat chain or components. +Export wooden boxes for conveyor equipment. +Bundle according to customers’ requirements.
Port: ZheJiang port

1260 Collection Large Quality Round Chain Injection Moulded Split Plastic Sprocket

RoundNameDesign no.No.of toothBore(mm)Pitch diameter(mm)Outside the house diameter(mm)Hub width(mm)
1260 Sequence sprocketSS1260-16-R3016thirty130.two130.nine40
SS1260-sixteen-R3535
SS1260-sixteen-R40forty
SS1260-eighteen-R301830146.three146.eight
SS1260-eighteen-R3535
SS1260-eighteen-R4040
SI1260-16-R301630130.2130.nine40
SI1260-16-R3535
SI1260-sixteen-R4040
SI1260-18-R3018thirty146.3146.8
SI1260-18-R3535
SI1260-18-R4040

Business Details
Packaging & China Company Personalize Manufacturing facility Cost generate coupling pto shaft coupling travel shaft coupling flexible jaw coupling Shipping and delivery
FAQ
Our Providers

sprocket

How to choose the right sprocket

Knowing the size of the chain is important when looking for the right sprocket. Also, you must know the number of teeth you need and their angle. The angle between the teeth is equal to 360 degrees divided by the number of teeth. This information will help you find the right sprocket for your specific application.

Long Through Hole

Sprockets are critical to the efficiency and uptime of roller chain drives. To ensure your sprocket is installed correctly, it is important to know the dimensions of the sprocket, including its outside diameter, through-hole length, and hub diameter. Pore ​​size is also an important consideration. Most sprockets have a 1/8″ bore, while others may have a larger bore.
Sprockets are usually secured to the shaft using ANSI standard-sized keyways and set screws. However, not all sprockets are compatible with all shaft diameters, so it is important to check the keyway size before purchasing.
Sprockets are available in a variety of styles and configurations. Some types of sprockets are welded to a solid hub, while others are bolted or split to the hub. Both types have different adjustments and you can easily change them without disassembling the device. Sprockets can be purchased from many US manufacturers in A, B or C hub configurations. For example, the hub diameter of an A-type sprocket determines its width, while a B-type sprocket has a hole for a bushing.
Sprockets are used in chain-driven motion systems, usually to carry heavy loads. It is very important to choose the right app for the right app to avoid damaging your device. If you’re not sure, learn about your system and how it’s assembled.

face width

The face width of the sprocket is limited by the meshing clearance with the chain. It does not affect tooth length. The outside diameter of the chain tip may vary depending on the type of tool used. Dimensional tolerances for keyways and set screws are also important.

diameter

One of the most important characteristics of a sprocket is its diameter. The diameter of the sprocket is used as a guide for choosing the proper sprocket size for your bike. Its number of teeth and diameter also affect the size of the chain.
The diameter of a sprocket is a function of its pitch or the distance between the centers of the link hinges. Diameters are in millimeters and expressed in standard ANSI chain numbers. Popular spacing is 3/8″ or 1/2″.
In order to make the chain drive smoothly, the sprocket and the chain should be properly matched. Incorrect pitch sprockets can damage the chain and shorten its life. Sprockets should provide precise tooth count, consistent pitch, and high wear resistance. It should also be designed to be rigid and impact resistant. CZPT chain suppliers can custom design sprockets in a variety of sizes, pitches, and diameters to suit your needs.
The number of teeth on the roller sprocket is also important. This is because the sprocket is in contact with the chain, causing frictional wear. The teeth on the sprocket can affect the durability of the chain, which is why choosing a sprocket with hardened teeth can change the world.sprocket

hub type

The hub type of the sprocket is key to proper engagement with the chain. Several options are available. The sprocket hub type is cylindrical and is available in a variety of sizes and styles. Sprockets are usually made of steel or stainless steel.
There are four main types of hubs for sprockets. They come under different names from different manufacturers, but they all share some common characteristics. These include Types A, B, and C. Each type has its own advantages and disadvantages. A-Plate sprockets are flat and have no hubs, while B-Hub sprockets are flat with hubs mounted on one side of the plate. C-shaped sprockets extend on both sides of the plate for larger pitch circle diameters and heavier axles.
A sprocket with a large pitch diameter needs a sprocket with a large pitch, and a chain with a small pitch diameter needs a chain with a small pitch. A-type sprockets are smaller and fit more closely to the equipment, while C-type sprockets need to be wider and thicker to carry more weight. Also, the pitch diameter is important because it determines whether the sprocket will fit correctly with the chain.
Steel split sprockets are easy to install and remove. They are held together by bolts on the hub, ranging in pitch size from 40 to 240. They are typically used in applications involving multiple drive shafts.

HZPT ZTB series

ZTB sprockets are an important part of a bicycle chain system. Its uptime is very important to maximize uptime and efficiency. key cSelect sprockets are characterized by size, pitch and bore. MDS accepts sprockets of various bore diameters from 1/2″ to 2″.
A sprocket is a wheel-like structure with teeth on the end. These teeth interlock with the chain, allowing simple rotational movement of large machines and equipment. ZTB sprockets are an excellent choice for a wide range of applications, including construction and agricultural machinery.
ISO sprockets have a suffix number indicating the number of chains in the chain. For example, 16B-2 sprockets have 1″ pitch and dual spools. If you’re buying sprockets for your bike, be sure to check the sprocket pitch.
The teeth on the sprocket are responsible for frictional wear, so choosing the right teeth is critical. The right teeth can increase the life of the sprocket and chain. A good sprocket has at least 17 teeth. Sprockets with a higher number of teeth last longer without causing chain slip. Typically, the teeth are the same material as the sprockets, but you can find removable teeth for a more affordable option. The teeth on the sprocket can also be hardened. Induction hardening is the most commonly used process.
ZTB sprockets can be made from many different materials. Some materials are more expensive than others, while others are softer and stronger. If you’re not sure which one to buy, try explaining the difference between the different sprockets to the sprocket manufacturer. They should be able to give you details about their interchangeability and quality.
sprocket

set screw

Set screws are screws designed to hold two or more parts together. There are many different types of set screws, each with a different purpose and design. They usually come in imperial and metric sizes with a hex socket driver on one end and a cup tip on the other. They are made of hardened steel and have a black oxide finish. Some varieties have flanges, while others don’t.
Set screws with chain studs can be used in a variety of applications. For example, they can be used in agricultural equipment, heavy equipment and other industries. They come in several different sizes and thread sizes and are available in a variety of designs. Some are specific to the mining industry, while others are more general.
The company also offers custom setscrews, as well as hex, spline, square and socket heads. They have the capability to manufacture fasteners ranging from carbon steel to nickel and silicon bronze. Their products also meet Mil-I-4528 and QS 14000 standards.

China 1260 Series High Quality Round Chain Injection Moulded Split Plastic Sprocket     sprocket bike partChina 1260 Series High Quality Round Chain Injection Moulded Split Plastic Sprocket     sprocket bike part
editor by Cx 2023-06-28

China manufacturer Single Piece Injection Plastic Sprocket A02021 A02023 A02025 did chain and sprocket kit

Product Description

Product Description

Plastic Sprocket Types

The standard styles of a plastic roller chain sprocket are A-plate style, meaning there is no hub on either side of the sprocket, B-hub style, which has a hub on 1 side, and C-hub style, which has a hub on 2 sides.

Standard bore styles for plastic sprockets are a stock bore, a plain unfinished hole in the center of the sprockets. The finished bore is a specific bore size that includes a key-way and 2 stainless steel set screws. Idler sprocket, which we can supply bearing idler plastic sprockets, bronze bore idler sprockets, or plain bore style, advise the shaft size, and we provide the bore with proper clearance to idle on the shaft.

Product Parameters

Product Specifications

CODE Z Do mm DF mm
A57121 21 129 25/30/35/40
A57171 23 142 25/30/35/40
A57125 25 154 25/30/35/40

Company Profile

 

Services we can provide

1. Produce strictly following standard dimension
2. Material: 1045 Steel / Alloy Steel / Stainless Steel 304 & 316 
3. Standard: ANSI, DIN, JINS, ISO, KANA, Standard America, or customer’s drawing
4. Pilot bore, finished bore, taper bore, and special bore. 
5. Bright surface / high precision / Blacking /Electrophoretic-Coated
6. Advanced heat treatment and surface treatment craft
7. Best quality and competitive price. 
8. Welcome OEM / ODM 
9. Processing Equipment: Hobbing machine, Slotting machine, CNC lathes, and other equipment.
10. Sprocket Models: Contains special sprocket according to customer’s drawings, standard sprocket (American standard and metric).
 

Customization process
1.Provide documentation:CAD, DWG, DXF, PDF,3D model ,STEP, IGS, PRT

2.Quote:We will give you the best price within 24 hours

3.Place an order:Confirm the cooperation details and CZPT the contract, and provide the labeling service

4.Processing and customization:Short delivery time

Related products:

Factory:
As a professional China sprocket manufacturer and professional supplier, we ensure the quality of every sprocket. All items are checked and tested thoroughly during every working procedure and after the product is finally manufactured to ensure that the best quality product goes out in the market.

 

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Soft Tooth Surface
Manufacturing Method: Injection
Toothed Portion Shape: Spur Gear
Material: Plastic

sprocket

Select sprocket

If you are in the market for a new sprocket, there are several factors to consider. There are two basic types of sprockets: roller sprockets and flat bore sprockets. Each has its pros and cons, so it’s important to choose the right one for your needs.

Roller sprocket

A roller sprocket is a mechanical device used to turn a rotating shaft. The size of the sprocket depends on its speed and the size of the chain. It has a wide range of applications. In addition, it is a versatile mechanical device that is an excellent choice for a variety of applications.
To understand the design of a roller sprocket, you can draw an outline on a piece of paper and draw the radius of the roller. This will help you understand how your teeth are configured. For example, if the teeth of the sprocket are round, the rollers will have a semi-circular profile. Likewise, if the roller is linear, the arc will be tangent to the base circle. This will ensure smooth movement of the rollers, while also transmitting rotational motion with high precision.
The length of the roller chain varies depending on the drive type. In adjustable center drives, the chain should be replaced at 3% elongation, while fixed center drives should be replaced at 15% elongation. You can also check the chain condition of the sprocket by pulling the chain out of the larger sprocket. If the chain is moving off the larger sprocket, it is time to replace the roller chain. Neglecting this aspect can result in damage to the sprocket.
The present invention relates to the manufacture of chain drive sprockets with a backlash-free mechanism. This is achieved by providing a center-to-center offset between the sprocket and roller connection lines. The resulting chain drive is backlash-free and allows full contact between the rollers and teeth.
Roller sprockets are critical components to ensure maximum efficiency and uptime. Its dimensions—bore bore, hub diameter, and through-hole length—are important. Additionally, the size of the roller sprockets varies according to the chain pitch, which is the distance between the centers of the roller pins.
sprocketRoller sprockets can be made of different materials, depending on their purpose. Most sprockets are made of metal or reinforced plastic. Some have bosses, some are shaped like wheels. Sprockets can be made of easily machined steel or resin. Different types of chains will engage different sprockets.
In addition to being used to mesh with chain drives, roller sprockets come in many different styles and bores. They are versatile and are often used with roller chains. Some are made of 1045CD carbon steel and have hardened teeth. Additionally, they are fully ANSI B29.1 compliant and some are manufactured for OEMs and aftermarket suppliers.

Flat hole sprocket

Flat bore sprockets are sprockets that are not specially machined. Flat bore sprockets do not have set screws, keyways or other special features. These features often require additional machining prior to installation. An important thing to keep in mind when buying a flat bore sprocket is the maximum bore. This refers to the maximum size that can be drilled without compromising structural integrity. Such measurements are usually listed in supplier directories.
Flat bore sprockets are available with standard bore or metric bore. Sprockets are used with specific chains. All chains are manufactured to a standard called “pitch”. The pitch is the distance from the center of one needle to the center of the next needle.sprocket

Steel split sprocket

Steel split sprockets can be used in a variety of industrial applications. These sprockets can be used in a range of applications, from forestry and mining to food and plastics processing. These types of sprockets are available in a variety of bores, tooth counts, and sprocket styles. Some types are also abrasion resistant.
There are several manufacturers that offer steel split sprockets. Made from high carbon steel, they are available in split, solid and removable rim versions. These sprockets are also suitable for hydraulic or pneumatic systems. Some manufacturers also offer service and support, including life cycle performance analysis, customer part numbers, and barcodes.
Split sprockets are ideal for applications where the drive shaft is large and multiple sprockets are mounted on the same shaft. For example, large conveyor chain sprockets may require the use of a crane to install and may result in increased downtime. Split sprockets also make installation in tight spaces easier. They can also be easily assembled without disassembling the shaft assembly.
Split sprockets are available in stock and custom sizes. small Stainless steel sprockets are also available, as are split flat top conveyor sprockets. They are commonly used in conveyors and robotic systems. Certain types of sprockets are suitable for specific applications, including woodworking, food processing, and woodworking.
Dimensions of split sprockets may vary by application. For example, split hub sprockets can range from one-half inch to one-tenth of an inch. Additionally, split hub sprockets have bolt circle diameters ranging from three-quarters to thirteen inches.

China manufacturer Single Piece Injection Plastic Sprocket A02021 A02023 A02025     did chain and sprocket kitChina manufacturer Single Piece Injection Plastic Sprocket A02021 A02023 A02025     did chain and sprocket kit
editor by CX 2023-05-25

China Standard Plastic Conveyor Machining Industrial Chain Sprocket sprocket bushing

Product Description

Product Discription

Packaging & Delivery
Packaging Details        Carton or Wooden Box
Delivery Time                5-7 working days

Company Information

Related Products

Exhibition 

 

Material Capabilities: Plastic
Type: Conveyor
Name: Sprockets
Application: Transportation
Size: Customized
Usage: Transportation and Widely Usage
Samples:
US$ 0.01/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

sprocket

How to choose the right sprocket

Knowing the size of the chain is important when looking for the right sprocket. Also, you must know the number of teeth you need and their angle. The angle between the teeth is equal to 360 degrees divided by the number of teeth. This information will help you find the right sprocket for your specific application.

Long Through Hole

Sprockets are critical to the efficiency and uptime of roller chain drives. To ensure your sprocket is installed correctly, it is important to know the dimensions of the sprocket, including its outside diameter, through-hole length, and hub diameter. Pore ​​size is also an important consideration. Most sprockets have a 1/8″ bore, while others may have a larger bore.
Sprockets are usually secured to the shaft using ANSI standard-sized keyways and set screws. However, not all sprockets are compatible with all shaft diameters, so it is important to check the keyway size before purchasing.
Sprockets are available in a variety of styles and configurations. Some types of sprockets are welded to a solid hub, while others are bolted or split to the hub. Both types have different adjustments and you can easily change them without disassembling the device. Sprockets can be purchased from many US manufacturers in A, B or C hub configurations. For example, the hub diameter of an A-type sprocket determines its width, while a B-type sprocket has a hole for a bushing.
Sprockets are used in chain-driven motion systems, usually to carry heavy loads. It is very important to choose the right app for the right app to avoid damaging your device. If you’re not sure, learn about your system and how it’s assembled.

face width

The face width of the sprocket is limited by the meshing clearance with the chain. It does not affect tooth length. The outside diameter of the chain tip may vary depending on the type of tool used. Dimensional tolerances for keyways and set screws are also important.

diameter

One of the most important characteristics of a sprocket is its diameter. The diameter of the sprocket is used as a guide for choosing the proper sprocket size for your bike. Its number of teeth and diameter also affect the size of the chain.
The diameter of a sprocket is a function of its pitch or the distance between the centers of the link hinges. Diameters are in millimeters and expressed in standard ANSI chain numbers. Popular spacing is 3/8″ or 1/2″.
In order to make the chain drive smoothly, the sprocket and the chain should be properly matched. Incorrect pitch sprockets can damage the chain and shorten its life. Sprockets should provide precise tooth count, consistent pitch, and high wear resistance. It should also be designed to be rigid and impact resistant. CZPT chain suppliers can custom design sprockets in a variety of sizes, pitches, and diameters to suit your needs.
The number of teeth on the roller sprocket is also important. This is because the sprocket is in contact with the chain, causing frictional wear. The teeth on the sprocket can affect the durability of the chain, which is why choosing a sprocket with hardened teeth can change the world.sprocket

hub type

The hub type of the sprocket is key to proper engagement with the chain. Several options are available. The sprocket hub type is cylindrical and is available in a variety of sizes and styles. Sprockets are usually made of steel or stainless steel.
There are four main types of hubs for sprockets. They come under different names from different manufacturers, but they all share some common characteristics. These include Types A, B, and C. Each type has its own advantages and disadvantages. A-Plate sprockets are flat and have no hubs, while B-Hub sprockets are flat with hubs mounted on one side of the plate. C-shaped sprockets extend on both sides of the plate for larger pitch circle diameters and heavier axles.
A sprocket with a large pitch diameter needs a sprocket with a large pitch, and a chain with a small pitch diameter needs a chain with a small pitch. A-type sprockets are smaller and fit more closely to the equipment, while C-type sprockets need to be wider and thicker to carry more weight. Also, the pitch diameter is important because it determines whether the sprocket will fit correctly with the chain.
Steel split sprockets are easy to install and remove. They are held together by bolts on the hub, ranging in pitch size from 40 to 240. They are typically used in applications involving multiple drive shafts.

HZPT ZTB series

ZTB sprockets are an important part of a bicycle chain system. Its uptime is very important to maximize uptime and efficiency. key cSelect sprockets are characterized by size, pitch and bore. MDS accepts sprockets of various bore diameters from 1/2″ to 2″.
A sprocket is a wheel-like structure with teeth on the end. These teeth interlock with the chain, allowing simple rotational movement of large machines and equipment. ZTB sprockets are an excellent choice for a wide range of applications, including construction and agricultural machinery.
ISO sprockets have a suffix number indicating the number of chains in the chain. For example, 16B-2 sprockets have 1″ pitch and dual spools. If you’re buying sprockets for your bike, be sure to check the sprocket pitch.
The teeth on the sprocket are responsible for frictional wear, so choosing the right teeth is critical. The right teeth can increase the life of the sprocket and chain. A good sprocket has at least 17 teeth. Sprockets with a higher number of teeth last longer without causing chain slip. Typically, the teeth are the same material as the sprockets, but you can find removable teeth for a more affordable option. The teeth on the sprocket can also be hardened. Induction hardening is the most commonly used process.
ZTB sprockets can be made from many different materials. Some materials are more expensive than others, while others are softer and stronger. If you’re not sure which one to buy, try explaining the difference between the different sprockets to the sprocket manufacturer. They should be able to give you details about their interchangeability and quality.
sprocket

set screw

Set screws are screws designed to hold two or more parts together. There are many different types of set screws, each with a different purpose and design. They usually come in imperial and metric sizes with a hex socket driver on one end and a cup tip on the other. They are made of hardened steel and have a black oxide finish. Some varieties have flanges, while others don’t.
Set screws with chain studs can be used in a variety of applications. For example, they can be used in agricultural equipment, heavy equipment and other industries. They come in several different sizes and thread sizes and are available in a variety of designs. Some are specific to the mining industry, while others are more general.
The company also offers custom setscrews, as well as hex, spline, square and socket heads. They have the capability to manufacture fasteners ranging from carbon steel to nickel and silicon bronze. Their products also meet Mil-I-4528 and QS 14000 standards.

China Standard Plastic Conveyor Machining Industrial Chain Sprocket     sprocket bushingChina Standard Plastic Conveyor Machining Industrial Chain Sprocket     sprocket bushing
editor by CX 2023-05-18

China 12 teeth 30 Bore High Quality Round Classic Injection Moulded Plastic Sprockets With Conveyor Mould Round BORE Sprockets bike chain sprocket

Warranty: 3 months
Relevant Industries: Foodstuff & Beverage Manufacturing facility
Content: POM
Regular: ISO9001:2015
Enamel variety: twelve
Color: White
Item title: twelve Tooth 30 BORE Injection Moulded Plastic Sprockets
Composition: A single-piece
Processing: Injection moulded
Kind: Producer
Port: ZheJiang
OEM: Yes
Packing: In accordance to customer’s need
Software: Conveyor areas
Packaging Particulars: +Carton packing containers for plastic belt, Amazon Sizzling Sale Necklace Valentine’s Working day Jewellery 2571 Stainless Steel Pendant Necklaces Really like Essential Coronary heart Couple Items For Females slat chain or factors. +Export picket bins for conveyor device. +Package in accordance to customers’ demands.
Port: ZheJiang port

twelve enamel thirty Bore High High quality Round Classic Injection Moulded Plastic Sprockets With Conveyor Mould Spherical BORE Sprockets

ROUNDTitleProduct no.No.of enamelBore(mm)Pitch diameter(mm)Outdoors diameter(mm)Hub width(mm)
2543 collection sprocket SC2543-twelve-R301230989729.5

Business Data
Packaging & Manufacturing facility Cost Steel produced spring shaft coupling Substantial High quality stepper motor shaft connector adaptable sleeve coupling Transport
FAQ
Our Solutions

sprocket

How to Use Sprocket for Conversion Optimization

The sprocket is usually attached to the shaft with one or more set screws. These set screws are usually ANSI standard sizes. However, these standards are not always suitable for all applications. Therefore, it is important to find a supplier who understands the correct keyway size for a specific application.

Typical sprocket

Typical sprocket hardnesses range from 35 to 40 HRC, depending on the application. However, some applications require lower hardness levels. The hardness level is determined by the material used to manufacture the sprocket. Further tempering can further reduce the hardness level. For example, conveyor sprockets with long pitch line thicknesses may not require hardening.
Steel is the most commonly used material for standard sprockets. However, many types of materials can also be used. The material used to make the sprocket depends largely on the type of equipment and tools used to make the sprocket. Steel is the most common building material because of its versatility and hardness and its use in a variety of applications. Bronze is another common material used for sprockets, usually in non-magnetic environments.
Another common material used for sprockets is reinforced plastic. While sprockets may look similar to gears, the main difference is their teeth and their ability to interlock with the chain. This allows simple rotational movement of large equipment and machinery.
The number of teeth on the sprocket is measured according to the number specified by the standard. An example is the ISO-DIN standard. A typical sprocket has an odd number of teeth to prevent the teeth from wearing out and causing the chain to slip.
A typical sprocket has rollers on the bottom and teeth on the top. When the chain meshes with the sprockets, the rollers get caught on the teeth. The rollers then pull the strap back, removing the extra force. However, if the bottom half of the chain is slack, the rollers will sit on the teeth and the chain will jump forward one tooth.

Function

Sprocket is an important feature for optimizing the user experience of your website. It works by analyzing user behavior on your website and delivering personalized interactions at the right time. This feature can also help you increase the conversion rate of your website. In this article, we’ll explore how to use Sprocket for conversion optimization.
The easiest way to explain the function of a chainring is to imagine a bicycle. The large sprocket is mounted on the pedal axle of the bike, and it drives the chain, which in turn drives the small sprocket on the rear wheel. The same principle is used for motorcycles and some other motor vehicles.
sprocket

element

Sprocket assemblies are wheel-shaped assemblies that hold gears and other components in place. They allow precise rotation of large gears. They can be made of metal or reinforced plastic. Different designs are available to suit different applications. Here are some examples. Sprockets are used for heavy duty rollers.
The components 12 and 14 slide together in the axial direction relative to the drive shaft 18 . The protrusions 22 on one part fit into complementary shaped grooves on the other part. Usually, the two parts are the same, but they can be different. For example, jigsaw-shaped protrusions may fit into grooves in opposing portions.
Sprocket components are usually made of metal or reinforced plastic. They resemble gears due to their wheel-shaped design and teeth. However, sprockets interact with different types of chains. Most sprocket chain systems operate similarly to bicycle chain assemblies. To ensure proper performance, choose the correct one for your specific application.
Whether you’re buying sprockets for an electric car, bike, or construction project, make sure you choose the right sprocket. Sprockets are versatile. A single sprocket may have one or two teeth, while a triple sprocket may have two or more.
sprocket

Put on

Proper maintenance of your bicycle’s chain and sprockets is critical to the performance and safety of your bicycle. These components wear out over time and should be replaced in the correct order. A well-maintained bike can go from 20,000 to 30,000 miles on one set of components. Mileage depends on the quality of the chain and sprockets and the type of riding style. For your safety and the performance of your bike, it is recommended to replace these components every few thousand miles.
Identifying a worn sprocket is easy; you can easily notice when a sprocket’s teeth are cut off. A badly worn sprocket will be unusable and your chain will end up stuck between the teeth. If the chain is damaged by worn sprockets, you should replace the chain.
When a chain or sprocket needs to be replaced, it is important to ensure that the sprocket is properly lubricated. Oiling will make the chain and sprocket more efficient and reduce the risk of damage. A good rule of thumb is to use anti-rust oil to protect your bike from corrosion.
In order to maintain the sprocket, you should follow the manufacturer’s maintenance instructions. You must replace them in the correct order. The first step is to remove the old sprocket and discard it. Old sprockets cannot be mixed with new sprockets.
It is also important to replace the front and rear sprockets when returning the chain. You should also lubricate the chain to prevent rust. Before lubricating, you can clean the chain with a non-petroleum-based cleaner. Don’t use oil as it doesn’t protect the chain from water and is more viscous.

China 12 teeth 30 Bore High Quality Round Classic Injection Moulded Plastic Sprockets With Conveyor Mould Round BORE Sprockets     bike chain sprocketChina 12 teeth 30 Bore High Quality Round Classic Injection Moulded Plastic Sprockets With Conveyor Mould Round BORE Sprockets     bike chain sprocket
editor by Cx 2023-05-15

China 1260 Series High Quality Round Chain Injection Moulded Split Plastic Sprocket dirt bike sprocket

Guarantee: 3 months
Applicable Industries: Food & Beverage Factory
Materials: PA
Standard: ISO9001:2015
Enamel number: sixteen/eighteen
Shade: Black
Item name: 1260 Series Chain Injection Moulded Plastic Sprocket
Construction: Split
OEM: Indeed
Sort: Company
Port: ZheJiang
Processing: Injection moulded
Packing: In accordance to customer’s requirement
Application: Conveyor components
Packaging Specifics: +Carton packing containers for plastic belt, Yin Yang Few Friendship Bracelets and necklace Handmade Tai Chi Allure Adjustable Rope Bracelets For Items slat chain or factors. +Export picket bins for conveyor device. +Package in accordance to customers’ demands.
Port: ZheJiang port

1260 Collection Substantial Top quality Round Chain Injection Moulded Split Plastic Sprocket

RoundTitleModel no.No.of teethBore(mm)Pitch diameter(mm)Exterior diameter(mm)Hub width(mm)
1260 Series sprocketSS1260-sixteen-R3016thirty130.two130.940
SS1260-sixteen-R3535
SS1260-16-R40forty
SS1260-18-R301830146.three146.eight
SS1260-18-R3535
SS1260-18-R4040
SI1260-16-R301630130.two130.940
SI1260-16-R3535
SI1260-16-R40forty
SI1260-18-R3018thirty146.three146.8
SI1260-18-R3535
SI1260-eighteen-R4040

Organization Details
Packaging & China Maker Personalize Factory Cost generate coupling pto shaft coupling push shaft coupling flexible jaw coupling Shipping and delivery
FAQ
Our Providers

sprocket

Sprocket Basics

When it comes to sprockets, it’s important to understand the basics of design. This includes chain size and number of teeth. The number of teeth will vary depending on the type of chain and application. When determining the number of teeth, the angle between the teeth should be at least 360 degrees.

size

There are many factors to consider when choosing the correct sprocket size. The first thing to do is to determine if the sprocket is a double sprocket or a single sprocket. Also available in a variety of sizes. To determine the exact size, you should measure the distance between the grooves of the sprocket teeth and their opposite tooth slots. The distance between these two points is called the caliper diameter.
The size of the sprockets also varies depending on the type of chain. Large sprockets have arms, while smaller sprockets usually don’t. The arms reduce weight and inertia, making them more economical to operate. Some sprockets also have openings, which make them easier to assemble and disassemble. Some sprockets are also plated for a stronger construction. Some sprockets are manufactured with flame or induction hardened parts.
Sprockets are often used in conveyors, pallet conveyors and other conveying systems. The size of the sprocket should match the size of the chain. A caliper will help you determine if the sprocket has worn teeth. Another way to identify worn sprockets is to measure their diameter.
In addition to size, sprockets should have the correct pitch and center distance. This will help keep the roller chain taut. The chain should be clean and properly lubricated. There should be a small gap between the pin and bushing so that oil can pass through the sprocket and chain. In addition to this, the center-to-center distance between the chain and the sprocket should be at least 1.5 times the diameter of the sprocket.
The chain should have at least 17 teeth, which is common in the industry. Having smaller spacing will reduce mechanical losses and noise. However, larger sprocket sizes are best for applications with higher workloads.

Material

Sprockets are mechanical parts that mesh with the chain to move the chain. It is made of metal or reinforced plastic and usually resembles a gear. It is a gear design for a specific type of chain. Most sprocket and chain systems work the same way, although they vary in material and pitch.
There are three basic types of sprockets: single-strand, double-strand, and triple-strand. The length and number of teeth for each type are specified by various standards. For reference, the ISO-DIN standard is shown. Most sprockets are made of alloy steel and are case hardened and tempered in the tooth area. They also have a hub and a key for mounting.
Metal sprockets can be made of steel or aluminum alloys. While steel is a more durable material, aluminum sprockets are more attractive. Steel is the best material for long rides, while aluminum sprockets are better for casual riding.
In addition to automotive and industrial applications, sprockets are used in oil and gas, textile machinery, instrumentation and mechanical transmission. Many types of sprockets are interchangeable with each other. For added protection, they can also be galvanized to prevent rust. The main methods of galvanizing sprockets are hot-dip galvanizing and electro-galvanizing.
Sprockets are usually made of steel or aluminum. Their design is similar to that of gears, although they are more widely spaced than their counterparts. They can also span longer distances than gears, allowing them to be used for power transmission.
sprocket

Function

A chain drive is a common type of mechanical transmission in which sprockets are used to help reduce the speed of a moving object. Sprockets can have horizontal, vertical or inclined pitch and are usually used in pairs. The teeth of the sprocket mesh with the rollers on the drive chain, reducing the speed. These sprockets are usually made of metal, but can also be made of plastic or composite materials.
The role of the sprocket is to transmit motion from the output shaft of the engine to the rear wheels. For this, the front sprocket needs to rotate at the same speed as the engine output shaft. It can be mounted either on the drive track or on the front of the vehicle. A third sprocket can be connected to the drive track. In addition, the front sprocket is used to pull the drive chain. This will help transfer power from the engine to the rear wheels, allowing the motorcycle to travel forward. The side plates of the chain also help transmit chain tension.
The bushings are subjected to the tension applied to the chain as it passes through the sprockets thousands of times per minute. This puts pressure on the pin inside the bushing. Additionally, the pins must withstand bending and shearing forces transmitted from the plate to the bushing. The pins must also withstand impact and have high tensile strength. If the pin is worn, it will need to be replaced or repaired.
Sprockets power the chain-driven motion system and carry heavy loads. Proper selection of sprockets can prevent damage to your equipment. To do this, you need to select the appropriate sprocket based on the type of assembly and system specification.
sprocket

maintain

Sprocket maintenance is an important part of motorcycle maintenance. Failure to do so will result in frequent chain changes and additional costs. Regular maintenance of your chain will help ensure your chain will last 30,000 miles or more. By comparison, a poorly maintained chain only lasts 10,000 miles.
Checking the sprocket is very easy. First, remove the chain and align it. Next, check for any foreign objects. If you see a damaged sprocket, you need to replace it. If you can’t replace a worn sprocket, you can buy a new chain. However, the new chain will not last as long as the old one.
Check for signs of rust. Rust can form on the chain due to exposure to humidity and heat. When the pins or rollers get rusted, the seals are damaged. If the pins or rollers are rusted, it’s time to replace the chain.
Regular maintenance of the chain is important to prevent kinks and slippage. This can cause excessive wear on the sprockets and chain. If the teeth are worn, the chain will not be able to properly grip the sprocket, resulting in difficult shifting and severe vibration.
If your chain is several years old, it is important to lubricate it every few months to prevent rust. It is also important to clean the chain thoroughly before lubricating to keep it clean and lubricated. Non-petroleum-based cleaners can help remove grit that may have built up. If you use the chain for a long time, you will need to clean it every 300-600 miles.

China 1260 Series High Quality Round Chain Injection Moulded Split Plastic Sprocket     dirt bike sprocketChina 1260 Series High Quality Round Chain Injection Moulded Split Plastic Sprocket     dirt bike sprocket
editor by Cx 2023-05-09