Tag Archives: precision roller chains

China best Short Pitch Precision Bush Chains China ISO Standard Excavator Roller Chain Sprocket with Hubs Sprocket Gear sprocket bushing

Product Description

SPROCKET  5/8” X 3/8”  10B SERIES SPROCKETS
 

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 16.0mm
Radius Width C 1.6mm
Tooth Width b1 9.0mm
Tooth Width B1 9.1mm
Tooth Width B2 25.5mm
Tooth Width B3 42.1mm
10B SERIES ROLLER CHAINS  
Pitch 15.875 mm
Internal Width 9.65 mm
Roller Diameter 10.16 mm

 

 

Z de dp SIMPLEX DUPLEX TRIPLEX
dm D1 A dm D2 A dm D3 A
8 47.0 41.48 25 10 25 25 12 40 25 12 55
9 52.6 46.42 30 10 25 30 12 40 30 12 55
10 57.5 51.37 35 10 25 35 12 40 35 12 55
11 63.0 56.34 37 12 30 39 14 40 39 16 55
12 68.0 61.34 42 12 30 44 14 40 44 16 55
13 73.0 66.32 47 12 30 49 14 40 49 16 55
14 78.0 71.34 52 12 30 54 14 40 54 16 55
15 83.0 76.36 57 12 30 59 14 40 59 16 55
16 88.0 81.37 60 12 30 64 16 45 64 16 60
17 93.0 86.39 60 12 30 69 16 45 69 16 60
18 98.3 91.42 70 14 30 74 16 45 74 16 60
19 103.3 96.45 70 14 30 79 16 45 79 16 60
20 108.4 101.49 75 14 30 84 16 45 84 16 60
21 113.4 106.52 75 16 30 85 16 45 85 20 60
22 118.0 111.55 80 16 30 90 16 45 90 20 60
23 123.5 116.58 80 16 30 95 16 45 95 20 60
24 128.3 121.62 80 16 30 100 16 45 100 20 60
25 134.0 126.66 80 16 30 105 16 45 105 20 60
26 139.0 131.70 85 20 35 110 20 45 110 20 60
27 144.0 136.75 85 20 35 110 20 45 110 20 60
28 148.7 141.78 90 20 35 115 20 45 115 20 60
29 153.8 146.83 90 20 35 115 20 45 115 20 60
30 158.8 151.87 90 20 35 120 20 45 120 20 60
31 163.9 156.92 95 20 35 120 20 45 120 20 60
32 168.9 161.95 95 20 35 120 20 45 120 20 60
33 174.5 167.00 95 20 35 120 20 45 120 20 60
34 179.0 172.05 95 20 35 120 20 45 120 20 60
35 184.1 177.10 95 20 35 120 20 45 120 20 60
36 189.1 182.15 100 20 35 120 20 45 120 25 60
37 194.2 187.20 100 20 35 120 20 45 120 25 60
38 199.2 192.24 100 20 35 120 20 45 120 25 60
39 204.2 197.29 100 20 35 120 20 45 120 25 60
40 209.3 202.34 100 20 35 120 20 45 120 25 60
41 214.8 207.38 *100 20 40 120 20 50 *130 25 60
42 2,199 212.43 *100 20 40 120 20 50 *130 25 60
43 224.9 217.48 *100 20 40 120 20 50 *130 25 60
44 230.0 222.53 *100 20 40 120 20 50 *130 25 60
45 235.0 227.58 *100 20 40 *120 20 50 *130 25 60
46 240.1 232.63 *100 20 40 *120 20 50 *130 25 60
47 245.1 237.68 *100 20 40 *120 20 50 *130 25 60
48 250.2 242.73 *100 20 40 *120 20 50 *130 25 60
49 255.2 247.78 *100 20 40 *120 20 50 *130 25 60
50 260.3 252.82 *100 20 40 *120 20 50 *130 25 60
51 265.3 257.87 *100 20 40 *120 20 50 *130 25 60
52 270.4 262.92 *100 20 40 *120 20 50 *130 25 60
53 275.4 267.97 *100 20 40 *120 20 50 *130 25 60
54 280.5 273.03 *100 20 40 *120 20 50 *130 25 60
55 285.5 278.08 *100 20 40 *120 20 50 *130 25 60
56 290.6 283.13 *100 20 40 *120 20 50 *130 25 60
57 296.0 288.18 *100 20 40 *120 20 50 *130 25 60
58 300.7 293.23 *100 20 43 *120 20 57 *130 25 64
59 305.7 298.28 *100 20 43 *120 20 57 *130 25 64
60 310.8 303.33 *100 20 43 *120 20 57 *130 25 64
62 321.4 313.43 *100 20 43 *120 20 57 *130 25 64
64 331.5 323.53 *100 20 43 *120 20 57 *130 25 67
65 336.5 328.58 *100 20 43 *120 20 57 *130 25 67
66 341.6 333.64 *100 20 43 *120 20 57 *130 25 67
68 351.7 343.74 *100 20 43 *120 20 57 *130 25 67
70 361.8 353.84 *100 20 43 *120 20 57 *130 25 67
72 371.9 363.94 *100 20 43 *120 20 57 *130 25 67
75 387.1 379.10 *100 20 43 *120 20 57 *130 25 67
76 392.1 384.15 *100 20 43 *120 20 57 *130 25 67
78 402.2 394.25 *100 20 43 *120 20 57 *130 25 67
80 412.3 404.36 *100 20 43 *130 20 57 *130 25 67
85 437.6 429.62 *100 20 50 *130 20 58 *130 25 67
90 462.8 454.88 *100 20 50 *130 20 58 *130 25 67
95 488.5 480.14 *100 20 50 *130 20 58 *130 25 67
100 513.4 505.40 *100 20 50 *130 20 58 *130 25 67
110 563.9 555.92 *100 20 50 *130 20 58 *130 25 67
114 584.1 576.13 *100 20 50 *130 20 58 *130 25 67
120 614.4 606.45 *100 20 50 *130 20 58 *130 25 67
125 639.7 631.51 *100 20 50 *130 20 58 *130 25 67

Notice: *welding hub

BASIC INFO.
 

Product name  DIN ISO Standard Sprocket for Roller Chain
Materials Available  1. Stainless Steel: SS304, SS316, etc
2. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, etc
3. OEM according to your request
Surface Treatment Heat treatment, Quenching treatment, High frequency normalizing treatment, Polishing, Electrophoresis paint processing, Anodic oxidation treatment, etc
Characteristic Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Size Customer Drawings & ISO standard 
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order
Certificate ISO9001: 2008 
Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 20 days for samples. 45 days for official order.

INSTALLATION AND USING

The chain  spoket, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces  parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.

NOTICE

When fitting new chainwheels it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.

It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.

During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.

ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58

Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
 A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.

Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.

Roller chains made using ISO standard are sometimes called as isochains.

 

WHY CHOOSE US 

1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CZPT Marketing Network
7. Efficient After-Sale Service System

 

The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.

We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CZPT range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.

 

 

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Rolling Gear, Cut Gear
Toothed Portion Shape: Spur Gear
Material: 1045, Stainless Steel, Q235, Brass, Alloy
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

sprocket

Select sprocket

If you are in the market for a new sprocket, there are several factors to consider. There are two basic types of sprockets: roller sprockets and flat bore sprockets. Each has its pros and cons, so it’s important to choose the right one for your needs.

Roller sprocket

A roller sprocket is a mechanical device used to turn a rotating shaft. The size of the sprocket depends on its speed and the size of the chain. It has a wide range of applications. In addition, it is a versatile mechanical device that is an excellent choice for a variety of applications.
To understand the design of a roller sprocket, you can draw an outline on a piece of paper and draw the radius of the roller. This will help you understand how your teeth are configured. For example, if the teeth of the sprocket are round, the rollers will have a semi-circular profile. Likewise, if the roller is linear, the arc will be tangent to the base circle. This will ensure smooth movement of the rollers, while also transmitting rotational motion with high precision.
The length of the roller chain varies depending on the drive type. In adjustable center drives, the chain should be replaced at 3% elongation, while fixed center drives should be replaced at 15% elongation. You can also check the chain condition of the sprocket by pulling the chain out of the larger sprocket. If the chain is moving off the larger sprocket, it is time to replace the roller chain. Neglecting this aspect can result in damage to the sprocket.
The present invention relates to the manufacture of chain drive sprockets with a backlash-free mechanism. This is achieved by providing a center-to-center offset between the sprocket and roller connection lines. The resulting chain drive is backlash-free and allows full contact between the rollers and teeth.
Roller sprockets are critical components to ensure maximum efficiency and uptime. Its dimensions—bore bore, hub diameter, and through-hole length—are important. Additionally, the size of the roller sprockets varies according to the chain pitch, which is the distance between the centers of the roller pins.
sprocketRoller sprockets can be made of different materials, depending on their purpose. Most sprockets are made of metal or reinforced plastic. Some have bosses, some are shaped like wheels. Sprockets can be made of easily machined steel or resin. Different types of chains will engage different sprockets.
In addition to being used to mesh with chain drives, roller sprockets come in many different styles and bores. They are versatile and are often used with roller chains. Some are made of 1045CD carbon steel and have hardened teeth. Additionally, they are fully ANSI B29.1 compliant and some are manufactured for OEMs and aftermarket suppliers.

Flat hole sprocket

Flat bore sprockets are sprockets that are not specially machined. Flat bore sprockets do not have set screws, keyways or other special features. These features often require additional machining prior to installation. An important thing to keep in mind when buying a flat bore sprocket is the maximum bore. This refers to the maximum size that can be drilled without compromising structural integrity. Such measurements are usually listed in supplier directories.
Flat bore sprockets are available with standard bore or metric bore. Sprockets are used with specific chains. All chains are manufactured to a standard called “pitch”. The pitch is the distance from the center of one needle to the center of the next needle.sprocket

Steel split sprocket

Steel split sprockets can be used in a variety of industrial applications. These sprockets can be used in a range of applications, from forestry and mining to food and plastics processing. These types of sprockets are available in a variety of bores, tooth counts, and sprocket styles. Some types are also abrasion resistant.
There are several manufacturers that offer steel split sprockets. Made from high carbon steel, they are available in split, solid and removable rim versions. These sprockets are also suitable for hydraulic or pneumatic systems. Some manufacturers also offer service and support, including life cycle performance analysis, customer part numbers, and barcodes.
Split sprockets are ideal for applications where the drive shaft is large and multiple sprockets are mounted on the same shaft. For example, large conveyor chain sprockets may require the use of a crane to install and may result in increased downtime. Split sprockets also make installation in tight spaces easier. They can also be easily assembled without disassembling the shaft assembly.
Split sprockets are available in stock and custom sizes. small Stainless steel sprockets are also available, as are split flat top conveyor sprockets. They are commonly used in conveyors and robotic systems. Certain types of sprockets are suitable for specific applications, including woodworking, food processing, and woodworking.
Dimensions of split sprockets may vary by application. For example, split hub sprockets can range from one-half inch to one-tenth of an inch. Additionally, split hub sprockets have bolt circle diameters ranging from three-quarters to thirteen inches.

China best Short Pitch Precision Bush Chains China ISO Standard Excavator Roller Chain Sprocket with Hubs Sprocket Gear     sprocket bushingChina best Short Pitch Precision Bush Chains China ISO Standard Excavator Roller Chain Sprocket with Hubs Sprocket Gear     sprocket bushing
editor by CX 2023-05-25

China Short Pitch Precision Roller Chains and Driving Chains Sprocket Wheel best sprocket combination

Solution Description

“You offer a request, We’ll give you a perfect solution”.We uphold the enterprise philosophy “integrity, efficiency, collaboration, innovation”, good quality first, advanced technological innovation, precision creation, integrity administration, productive service, to support our consumers with the prime quality products and tremendous sophisticated technological innovation.
SMCC are make a complete assortment of sprockets are available ex-stock for chain No.578, 503, 603, 604, SS-one hundred ten and so on.Tooth profiles are forged or device minimize.Conveyor and elevator sprockets with/with no flame hardened enamel are also made as for each drawing.

Model No. 05B,06B,08A,08B,10A,12A16A,20A,24A,28A32A,40A
Components Ck45# could be modify depending on requests
Application Agricultural equipment,engineering machinery and so on
Certification ISO90001:2000
Worldwide marketplace Europe,South The us,Asia and so on

Basic Info.
 

Kind:

Simplex, Duplex, Triplex

Sprocket Product:

three/8″,1/2″,5/8″,3/4″,1″,1.twenty five”,1.50″,1.75″,2.00″,2.twenty five”,2.00″,2.25″,2.fifty”, 3″

Teeth Number:

nine-100

Common:

ANSI , JIS, DIN, ISO

Materials:

1571, 1045, SS304 , SS316  As Per Person Request.

Functionality Therapy:

Carburizing, High Frequency Treatment method, Hardening and Tempering, Nitriding

Surface Therapy:

Black of Oxidation, Zincing, Nickelage.

Attribute Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, and so forth
Layout criterion ISO DIN ANSI & Consumer Drawings
Application Industrial transmission gear
Package Picket Scenario / Container and pallet, or manufactured-to-purchase

Certification:

ISO9001 SGS

High quality Inspection:

Self-check and Closing-verify

Sample:

ODM&OEM, Trial Order Obtainable and Welcome

Gain High quality very first, Service first, Aggressive price, Rapidly shipping and delivery
Supply Time 10 times for samples. 15 times for official order.

 

Installation AND Utilizing

The chain spocket, as a generate or deflection for chains, has pockets to keep the chain hyperlinks with a D-profile cross segment with flat aspect surfaces  parallel to the centre aircraft of the chain backlinks, and outer surfaces at right angles to the chain link centre plane. The chain back links are pressed firmly in opposition to the outer surfaces and every of the facet surfaces by the angled laying surfaces at the base of the pockets, and also the help surfaces of the wheel entire body jointly with the end sides of the webs shaped by the top and trailing partitions of the pocket.

Recognize

When fitting new chainwheels it is very essential that a new chain is equipped at the identical time, and vice versa. Utilizing an previous chain with new sprockets, or a new chain with aged sprockets will cause fast dress in.

It is crucial if you are setting up the chainwheels yourself to have the manufacturing facility service guide certain to your design. Our chainwheels are manufactured to be a direct alternative for your OEM chainwheels and as these kinds of, the set up must be done according to your designs support handbook.

Throughout use a chain will stretch (i.e. the pins will use causing extension of the chain). Using a chain which has been stretched much more than the previously mentioned greatest allowance leads to the chain to experience up the teeth of the sprocket. This triggers hurt to the guidelines of the chainwheels enamel, as the power transmitted by the chain is transmitted totally by means of the leading of the tooth, fairly than the complete tooth. This benefits in extreme donning of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Expectations organizations (this kind of as ANSI and ISO) sustain expectations for design, dimensions, and interchangeability of transmission chains. For example, the pursuing Table shows knowledge from ANSI standard B29.1-2011 (Precision Electrical power Transmission Roller Chains, Attachments, and Sprockets) created by the American Modern society of Mechanical Engineers (ASME). See the references[8][9][ten] for additional information.

ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Supreme Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Standard Dimensions
Dimension Pitch Greatest Roller Diameter Least Supreme Tensile Energy Measuring Load
twenty five .250 in (6.35 mm) .130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 .375 in (9.fifty three mm) .two hundred in (5.08 mm) 1,760 lb (800 kg) eighteen lb (8.2 kg)
forty one .five hundred in (twelve.70 mm) .306 in (7.seventy seven mm) one,five hundred lb (680 kg) eighteen lb (8.2 kg)
forty .500 in (12.70 mm) .312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 .625 in (15.88 mm) .400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
sixty .750 in (19.05 mm) .469 in (eleven.ninety one mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (twenty five.40 mm) .625 in (fifteen.88 mm) 12,500 lb (5,700 kg) 125 lb (fifty seven kg)
100 one.250 in (31.75 mm) .750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
a hundred and twenty one.500 in (38.ten mm) .875 in (22.23 mm) 28,a hundred twenty five lb (12,757 kg) 281 lb (127 kg)
140 one.750 in (44.45 mm) 1.000 in (twenty five.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
a hundred and sixty 2.000 in (fifty.eighty mm) one.a hundred twenty five in (28.fifty eight mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
one hundred eighty 2.250 in (fifty seven.15 mm) 1.460 in (37.08 mm) sixty three,280 lb (28,seven hundred kg) 633 lb (287 kg)
two hundred two.five hundred in (63.50 mm) one.562 in (39.67 mm) seventy eight,one hundred seventy five lb (35,460 kg) 781 lb (354 kg)
240 three.000 in (76.20 mm) 1.875 in (forty seven.sixty three mm) 112,500 lb (fifty one,000 kg) 1,000 lb (450 kg

For mnemonic needs, under is yet another presentation of key dimensions from the exact same normal, expressed in fractions of an inch (which was component of the thinking powering the decision of favored quantities in the ANSI standard):

Pitch (inches) Pitch expressed
in eighths
ANSI normal
chain quantity
Width (inches)
onefour two8 two5 one8
38 threeeight threefive 3sixteen
1two foureight 41 one4
12 four8 four five16
58 five8 5 3eight
34 68 6 onetwo
one eight8 8 5eight

Notes:
1. The pitch is the distance amongst roller centers. The width is the length amongst the link plates (i.e. somewhat far more than the roller width to enable for clearance).
2. The right-hand digit of the standard denotes 0 = typical chain, 1 = lightweight chain, 5 = rollerless bushing chain.
three. The still left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” pursuing the normal variety denotes heavyweight chain. A hyphenated quantity pursuing the normal variety denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes quantity 60 heavyweight triple-strand chain.
 A normal bicycle chain (for derailleur gears) utilizes slim 1⁄2-inch-pitch chain. The width of the chain is variable, and does not impact the load capacity. The far more sprockets at the rear wheel (traditionally 3-6, presently 7-twelve sprockets), the narrower the chain. Chains are offered in accordance to the quantity of speeds they are created to operate with, for instance, “ten velocity chain”. Hub gear or single pace bicycles use 1/2″ x 1/8″ chains, the place 1/8″ refers to the greatest thickness of a sprocket that can be utilized with the chain.

Typically chains with parallel shaped hyperlinks have an even quantity of links, with every single slender website link adopted by a broad a single. Chains built up with a uniform sort of website link, slim at 1 and broad at the other stop, can be made with an odd amount of hyperlinks, which can be an gain to adapt to a special chainwheel-distance on the other aspect these kinds of a chain tends to be not so sturdy.

Roller chains made using ISO regular are at times known as as isochains.

 

WHY Pick US 
 

1. Trustworthy Top quality Assurance System
2. Chopping-Edge Computer-Controlled CNC Equipment
three. Bespoke Answers from Hugely Skilled Specialists
four. Customization and OEM Offered for Particular Software
5. Comprehensive Stock of Spare Areas and Equipment
6. Well-Developed Worldwide Advertising Community
7. Efficient Right after-Sale Service Method

 

The 219 sets of innovative automatic generation tools supply guarantees for substantial merchandise top quality. The 167 engineers and experts with senior specialist titles can design and create goods to fulfill the specific requires of buyers, and OEM customizations are also offered with us. Our audio global provider network can give buyers with timely following-income technological services.

We are not just a company and supplier, but also an market consultant. We perform professional-actively with you to offer you expert tips and product suggestions in order to stop up with a most value powerful product available for your particular software. The clientele we serve worldwide selection from end customers to distributors and OEMs. Our OEM replacements can be substituted where ever needed and ideal for each repair and new assemblies.

 

US $1.1-12
/ Piece
|
1 Piece

(Min. Order)

###

Control Mode: Continuous Path Control
Drive Mode: Mechanical
Application: Welding, Loading, Forging
Condition: New
Certification: ISO, CE, RoHS
Standard or Nonstandard: Standard, Nonstandard

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model No. 05B,06B,08A,08B,10A,12A16A,20A,24A,28A32A,40A
Materials Ck45# could be change depending on requests
Application Agricultural machinery,engineering machinery and so on
Certification ISO90001:2000
Global market Europe,South America,Asia and so on

###

Type:

Simplex, Duplex, Triplex

Sprocket Model:

3/8",1/2",5/8",3/4",1",1.25",1.50",1.75",2.00",2.25",2.00",2.25",2.50", 3"

Teeth Number:

9-100

Standard:

ANSI , JIS, DIN, ISO

Material:

1020, 1045, SS304 , SS316;  As Per User Request.

Performance Treatment:

Carburizing, High Frequency Treatment, Hardening and Tempering, Nitriding

Surface Treatment:

Black of Oxidation, Zincing, Nickelage.

Characteristic Fire ResistantOil Resistant, Heat Resistant, Abrasive resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order

Certification:

ISO9001 SGS

Quality Inspection:

Self-check and Final-check

Sample:

ODM&OEM, Trial Order Available and Welcome

Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 10 days for samples. 15 days for official order.

###

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

###

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58
US $1.1-12
/ Piece
|
1 Piece

(Min. Order)

###

Control Mode: Continuous Path Control
Drive Mode: Mechanical
Application: Welding, Loading, Forging
Condition: New
Certification: ISO, CE, RoHS
Standard or Nonstandard: Standard, Nonstandard

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model No. 05B,06B,08A,08B,10A,12A16A,20A,24A,28A32A,40A
Materials Ck45# could be change depending on requests
Application Agricultural machinery,engineering machinery and so on
Certification ISO90001:2000
Global market Europe,South America,Asia and so on

###

Type:

Simplex, Duplex, Triplex

Sprocket Model:

3/8",1/2",5/8",3/4",1",1.25",1.50",1.75",2.00",2.25",2.00",2.25",2.50", 3"

Teeth Number:

9-100

Standard:

ANSI , JIS, DIN, ISO

Material:

1020, 1045, SS304 , SS316;  As Per User Request.

Performance Treatment:

Carburizing, High Frequency Treatment, Hardening and Tempering, Nitriding

Surface Treatment:

Black of Oxidation, Zincing, Nickelage.

Characteristic Fire ResistantOil Resistant, Heat Resistant, Abrasive resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order

Certification:

ISO9001 SGS

Quality Inspection:

Self-check and Final-check

Sample:

ODM&OEM, Trial Order Available and Welcome

Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 10 days for samples. 15 days for official order.

###

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

###

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58

Problems with sprockets

If you’re having trouble with your HP Sprocket, you’re not alone. This bike component isn’t without issues, but it’s also susceptible to other wear and tear. Check for worn tooth surfaces and hooked tips. When teeth wear out quickly, they can break the chain, so make sure you fix them as soon as possible.
You can solve this issue by installing the latest firmware update for your Sprocket printer. The firmware update is designed to provide a safe and reliable printing experience. When your Sprocket printer doesn’t print the pictures, it is likely because it’s not receiving enough power from the battery. Make sure the battery is at least 25% before you begin.
Insufficient or improper lubrication can cause a variety of problems. Proper lubrication can prevent or remove excessive wear, or protect the chain from the environment. It can also reduce the risk of excessive chain slack. The following are just a few common problems that can cause slack in the chain.
In case of excessive wear, a new sprocket may be necessary. If the sprocket and chain do not match, replace them with a similar size. In addition, a shock absorber can be installed to minimize load. Another alternative is to install a take-up idler, which helps prevent excessive chain elongation.
Improper alignment of the sprocket is another common cause of chain drive problems. If the sprocket is not aligned correctly, it will not be able to move smoothly through the chain during rotation. The teeth of the sprocket will become hooked, preventing the roller from smoothly moving through. This will force the roller chain to cling to the sprocket, and need to be replaced.
sprocket

Common types of sprockets

Power transmission equipment typically utilizes sprockets and chains. These are used in pairs to provide speed reduction. They are different from gears because the teeth of the sprocket do not mesh with those of the mating gears. They are typically made of plastic, but they can also be made of metal.
There are many common types of sprockets and chains. Some of these types of sprockets have large, narrow, or variable tooth pitch. The size of the sprocket depends on the size and pitch of the chain. If you are using a chain with a large pitch diameter, you should use a sprocket with large teeth. Conversely, a smaller pitch diameter will require a sprocket with small teeth.
Another way to identify the type of sprocket you’re using is to look at the number of strands. Single-strand sprockets are the most common, but you’ll also find many types that have multiple strands of chains. Multi-strand chains are generally larger and allow for greater torque to be transmitted from a common central shaft.
Another type is flat sprockets, which have no hub and drive through a series of holes. They are used for transmission of power or material in chain-driven systems, such as bicycles. They can also be used for overhead conveyors. In some cases, there is a special type that fits the shaft of an automobile, such as a transmission shaft.
There are many different types of sprockets, each with a unique function. Some are used for conveyor chains, while others are used for other applications. In most cases, sprockets are used in chain-driven machinery. They come in different sizes and pitches and are designed to work with particular types of chains.
When choosing a motor or transmission system, it is important to match sprockets and chains. A perfectly matched set of components will ensure that the motor and transmission work together. Generally, this alignment comes down to sprocket-to-sprocket matching. The process involves jacking up the motor and lining up the sprockets and chains. Then, the sprockets and chains are locked into place with cotter pins.
sprocket

Size of sprockets

To determine the correct chain length and sprocket diameter, the first step is to understand the difference between the diameters of the sprockets and cassettes. The smaller the diameters of sprockets, the lower the chain tension. The larger the sprocket, the longer the chain will need to be. This process requires the use of a derailleur that can roll a larger number of chains.
In addition to chain length, the spacing between sprockets is another important factor. If the sprockets are too far apart, the chain may slip through the sprocket. A smaller range of sprockets will prevent this and will increase the number of discrete gear ratios. In addition, if the chain skips over a sprocket, it will cause discomfort in shifting.
Choosing the correct size of sprockets is essential for cycling. Larger sprockets are usually necessary for road bikes. Likewise, a road bike will have larger gears than a gravel bike. Larger gears will help the cyclist accelerate more smoothly and ensure a smoother ride.
Using a chain calculator can help you determine the proper size of sprockets for your bike. You can also use a chain length calculator to determine the correct chain length. This calculator uses the distance between the sprockets to calculate chain length. However, it is important to note that it is not possible to calculate the length of a chain with a single sprocket.
The size of the sprocket must be in proportion to the length of the chain. It can be controlled by either adjusting the center of the sprocket or moving it to the proper position. The center of rotation of the sprocket is defined by the chosen geometry reference.
The report covers global and regional sales of sprockets. It also contains information on competitive dynamics and market concentration status. Moreover, the report includes detailed information about the manufacturers of sprockets. The study also includes regional and global market forecasts. It also provides a detailed breakdown of sales by type, application, and region.
When choosing the right size of sprockets, remember to take measurements and do some arithmetic. For example, a smaller countershaft sprocket will improve low-speed acceleration, while a larger rear sprocket will improve fuel mileage. In addition, it is recommended that you use the reverse sprocket size if you’re going to be riding on long highways.
sprocket

Maintenance of sprockets

Proper maintenance of sprockets and chains is crucial to the functioning of your bike. It is important to avoid overstretching them. If this happens, they will not fit properly and will require replacement. It is also important to prevent the kinks in your chain to reduce the amount of stress on your sprockets.
If you are unsure of the state of your sprockets and chains, you can replace them with a new chain and a new sprocket. If you notice that a chain is squeezing between the rear sprocket, it is time to replace the sprocket.
Proper maintenance of sprockets and chains involves cleaning and lubrication. Regular cleaning and lubrication can prevent damage and extend the life cycle of these parts. Proper lubrication will also ensure their smooth operation and minimize the noise. Regardless of whether your sprockets or chains are new or used, lubrication should be carried out at regular intervals to extend their useful life cycle.
Proper alignment of the sprockets and chains will ensure the most efficient performance and reliability. If you regularly change your chain and sprockets, you can prolong the life of these components and avoid costly repairs. Make sure you change the sprockets and chains only with professional mechanics. Always follow the instructions of the motorcycle manufacturer.
Proper maintenance of sprockets and chains is important to prevent premature sprocket replacement. Changing the sprocket too often can result in poor meshing, accelerating wear and tear of the new sprockets. When changing the sprocket, it is essential to turn the worn surface over before you install the new one.
It is important to follow the instructions and warning signs for proper maintenance of sprockets and chains. The safety of the workers and the environment should be prioritized. Follow the instructions of the manufacturer and avoid dangerous situations. It is essential not to anneal or electroplate the chain parts.
Proper lubrication is also vital. Use a non-petroleum based cleaner to clean the chain thoroughly and then apply lubricant. Avoid using engine oil as it is more viscous and cannot protect the chain against water.

China Short Pitch Precision Roller Chains and Driving Chains Sprocket Wheel     best sprocket combinationChina Short Pitch Precision Roller Chains and Driving Chains Sprocket Wheel     best sprocket combination
editor by czh 2022-12-29

China Standard Transmission Short Pitch Straight Stainless Steel Precision Industrial British Standard Bush Self-Lubricating Double Plastic Duplex Roller Chains China Factory with Hot selling

Item Description

Transmission Limited Pitch Straight Stainless Metal Precision Industrial British Common Bush Self-Lubricating Double Plastic Duplex Roller Chains China Factory
 

Bushing Sprockets: Bushing sprockets can simplify chain system upkeep by replacing only worn sprocket assemblies, while the bushings can nevertheless be reused. The bushing also has a tightly tapered mating surface area that can transmit larger torques than simple vital factors. Near-fitting surfaces give better functionality in purposes with large commence/end functions or shock masses.
Bushing Sprockets: Bushing sprockets can simplify chain system upkeep by changing only worn sprocket assemblies, although the bushings can nonetheless be reused. The bushing also has a tightly tapered mating surface that can transmit greater torques than simple critical elements. Close-fitting surfaces offer much better performance in programs with hefty begin/quit functions or shock masses.

China Standard Transmission Short Pitch Straight Stainless Steel Precision Industrial British Standard Bush Self-Lubricating Double Plastic Duplex Roller Chains China Factory     with Hot selling

China best Transmission Conveyor Belt Parts Gearbox Short Pitch Precision Roller Chains and Bush Chains 10b 50 Teeth Hub Sprocket with high quality

Merchandise Description

SPROCKET  5/8” X 3/8”  10B Series SPROCKETS
 

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 16.0mm
Radius Width C one.6mm
Tooth Width b1 nine.0mm
Tooth Width B1 9.1mm
Tooth Width B2 25.5mm
Tooth Width B3 forty two.1mm
10B Series ROLLER CHAINS  
Pitch fifteen.875 mm
Internal Width 9.sixty five mm
Roller Diameter 10.16 mm

 

 

Z de dp SIMPLEX DUPLEX TRIPLEX
dm D1 A dm D2 A dm D3 A
8 47. forty one.48 25 10 twenty five 25 twelve forty twenty five 12 55
nine 52.six 46.42 30 ten twenty five 30 12 forty 30 twelve 55
10 57.five fifty one.37 35 ten twenty five 35 twelve 40 35 twelve 55
eleven sixty three. fifty six.34 37 twelve 30 39 fourteen 40 39 16 55
12 68. sixty one.34 42 12 thirty forty four 14 forty 44 sixteen fifty five
thirteen 73. sixty six.32 47 12 thirty 49 14 forty 49 16 fifty five
fourteen seventy eight. seventy one.34 52 twelve thirty 54 14 40 54 sixteen fifty five
fifteen 83. 76.36 57 12 thirty fifty nine 14 forty fifty nine 16 55
sixteen 88. 81.37 sixty 12 thirty 64 sixteen 45 sixty four 16 60
seventeen 93. 86.39 sixty twelve thirty sixty nine 16 forty five sixty nine sixteen sixty
eighteen ninety eight.three 91.forty two 70 14 thirty seventy four 16 forty five seventy four sixteen sixty
19 103.three ninety six.45 70 14 thirty 79 sixteen 45 79 16 sixty
twenty 108.4 a hundred and one.forty nine 75 14 thirty 84 sixteen forty five eighty four sixteen 60
21 113.four 106.fifty two 75 sixteen 30 85 16 45 eighty five twenty 60
22 118. 111.55 80 sixteen 30 ninety sixteen forty five 90 20 60
23 123.five 116.58 80 sixteen thirty 95 16 45 95 twenty sixty
24 128.three 121.sixty two eighty sixteen 30 one hundred 16 forty five one hundred twenty 60
twenty five 134. 126.66 eighty 16 30 105 sixteen 45 a hundred and five twenty sixty
26 139. 131.70 eighty five 20 35 110 twenty forty five a hundred and ten twenty 60
27 a hundred and forty four. 136.75 85 twenty 35 one hundred ten 20 forty five one hundred ten 20 60
28 148.seven 141.seventy eight ninety twenty 35 a hundred and fifteen 20 45 115 twenty 60
29 153.eight 146.83 ninety 20 35 115 20 forty five a hundred and fifteen 20 sixty
thirty 158.eight 151.87 ninety twenty 35 one hundred twenty 20 45 a hundred and twenty twenty 60
31 163.nine 156.ninety two 95 20 35 120 twenty forty five a hundred and twenty twenty sixty
32 168.9 161.95 ninety five twenty 35 one hundred twenty 20 45 120 20 60
33 174.5 167.00 ninety five 20 35 120 20 45 one hundred twenty 20 sixty
34 179. 172.05 95 20 35 120 20 forty five one hundred twenty 20 60
35 184.one 177.10 ninety five twenty 35 120 twenty 45 one hundred twenty 20 sixty
36 189.one 182.fifteen a hundred 20 35 one hundred twenty 20 forty five one hundred twenty twenty five sixty
37 194.two 187.20 one hundred twenty 35 a hundred and twenty twenty forty five a hundred and twenty twenty five 60
38 199.2 192.24 one hundred twenty 35 a hundred and twenty 20 forty five one hundred twenty 25 sixty
39 204.two 197.29 a hundred twenty 35 120 20 forty five 120 25 sixty
forty 209.three 202.34 one hundred 20 35 120 twenty forty five 120 twenty five sixty
forty one 214.eight 207.38 *a hundred twenty forty a hundred and twenty twenty fifty *a hundred thirty twenty five sixty
forty two 2,199 212.forty three *100 20 forty a hundred and twenty twenty fifty *130 25 60
forty three 224.9 217.48 *100 20 forty 120 20 50 *130 25 60
44 230. 222.53 *one hundred 20 40 one hundred twenty twenty fifty *a hundred thirty 25 sixty
forty five 235. 227.fifty eight *100 20 forty *120 twenty fifty *130 twenty five 60
forty six 240.1 232.63 *a hundred 20 forty *a hundred and twenty twenty fifty *130 25 sixty
forty seven 245.one 237.68 *a hundred twenty 40 *120 twenty 50 *a hundred thirty 25 60
forty eight 250.2 242.73 *100 20 forty *a hundred and twenty 20 50 *130 twenty five sixty
49 255.two 247.seventy eight *a hundred twenty 40 *a hundred and twenty twenty fifty *a hundred thirty twenty five sixty
50 260.3 252.eighty two *100 20 forty *one hundred twenty twenty fifty *a hundred thirty 25 60
51 265.3 257.87 *100 twenty 40 *one hundred twenty 20 fifty *130 25 sixty
52 270.4 262.ninety two *a hundred 20 forty *120 20 fifty *one hundred thirty twenty five sixty
fifty three 275.4 267.97 *100 twenty forty *a hundred and twenty twenty fifty *one hundred thirty twenty five 60
54 280.5 273.03 *100 twenty 40 *120 twenty 50 *one hundred thirty twenty five sixty
fifty five 285.5 278.08 *a hundred twenty 40 *120 20 fifty *130 twenty five sixty
fifty six 290.6 283.13 *a hundred twenty forty *120 20 50 *130 25 sixty
fifty seven 296. 288.eighteen *one hundred twenty 40 *120 20 fifty *a hundred thirty 25 60
58 three hundred.seven 293.23 *100 twenty forty three *a hundred and twenty 20 fifty seven *130 twenty five 64
fifty nine 305.7 298.28 *100 20 43 *120 20 57 *one hundred thirty twenty five sixty four
60 310.8 303.33 *a hundred twenty 43 *one hundred twenty twenty 57 *one hundred thirty twenty five sixty four
62 321.four 313.forty three *100 20 43 *120 20 57 *130 25 sixty four
sixty four 331.5 323.fifty three *100 twenty forty three *120 twenty fifty seven *a hundred thirty 25 sixty seven
sixty five 336.5 328.fifty eight *100 twenty 43 *one hundred twenty twenty fifty seven *a hundred thirty twenty five sixty seven
sixty six 341.six 333.64 *a hundred twenty 43 *a hundred and twenty 20 57 *130 25 67
sixty eight 351.7 343.74 *a hundred twenty forty three *a hundred and twenty 20 fifty seven *130 twenty five 67
70 361.eight 353.84 *one hundred twenty forty three *one hundred twenty twenty fifty seven *130 25 sixty seven
seventy two 371.9 363.94 *one hundred 20 forty three *a hundred and twenty 20 57 *one hundred thirty 25 sixty seven
75 387.1 379.ten *a hundred twenty forty three *a hundred and twenty twenty fifty seven *130 twenty five 67
seventy six 392.one 384.fifteen *100 twenty forty three *a hundred and twenty 20 57 *one hundred thirty twenty five 67
78 402.two 394.twenty five *one hundred twenty 43 *120 twenty 57 *a hundred thirty twenty five 67
80 412.3 404.36 *one hundred 20 43 *130 twenty fifty seven *130 twenty five 67
85 437.6 429.sixty two *a hundred twenty fifty *one hundred thirty 20 fifty eight *one hundred thirty 25 sixty seven
90 462.8 454.88 *one hundred twenty 50 *a hundred thirty 20 58 *a hundred thirty 25 sixty seven
95 488.5 480.14 *one hundred 20 fifty *a hundred thirty twenty 58 *one hundred thirty 25 67
a hundred 513.4 505.40 *100 20 50 *one hundred thirty 20 fifty eight *a hundred thirty twenty five 67
a hundred and ten 563.nine 555.92 *100 20 50 *a hundred thirty twenty 58 *a hundred thirty twenty five sixty seven
114 584.1 576.13 *one hundred twenty fifty *130 20 58 *a hundred thirty 25 sixty seven
one hundred twenty 614.four 606.forty five *one hundred 20 fifty *a hundred thirty 20 fifty eight *one hundred thirty 25 sixty seven
a hundred twenty five 639.7 631.51 *one hundred twenty 50 *130 20 fifty eight *one hundred thirty 25 sixty seven

Notice: *welding hub

Fundamental Info.
 

Product name  DIN ISO Common Sprocket for Roller Chain
Materials Available  1. Stainless Steel: SS304, SS316, and so on
2. Alloy Metal: C45, 45Mn, 42CrMo, 20CrMo, and so on
3. OEM according to your request
Area Treatment Warmth treatment, Quenching treatment method, Large frequency normalizing treatment, Polishing, Electrophoresis paint processing, Anodic oxidation therapy, and so forth
Characteristic Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, and many others
Design criterion ISO DIN ANSI & Consumer Drawings
Measurement Buyer Drawings & ISO standard 
Software Industrial transmission equipment
Deal Wooden Scenario / Container and pallet, or made-to-buy
Certificate ISO9001: 2008 
Edge Quality 1st, Provider very first, Aggressive value, Rapidly shipping
Shipping and delivery Time twenty days for samples. 45 times for official order.

Set up AND Utilizing

The chain  spoket, as a generate or deflection for chains, has pockets to maintain the chain back links with a D-profile CZPT part with flat side surfaces  parallel to the centre plane of the chain hyperlinks, and outer surfaces at appropriate angles to the chain url centre plane. The chain backlinks are pressed firmly against the outer surfaces and each and every of the side surfaces by the angled laying surfaces at the base of the pockets, and also the assist surfaces of the wheel physique collectively with the end sides of the webs fashioned by the major and trailing partitions of the pocket.

Recognize

When CZPT new chainwheels it is really essential that a new chain is equipped at the same time, and vice versa. Employing an aged chain with new sprockets, or a new chain with aged sprockets will lead to rapid put on.

It is important if you are setting up the chainwheels by yourself to have the manufacturing unit provider guide specific to your model. Our chainwheels are made to be a direct CZPT for your OEM chainwheels and as this sort of, the installation must be done according to your designs service handbook.

Throughout use a chain will stretch (i.e. the pins will dress in triggering extension of the chain). Employing a chain which has been stretched much more than the over maximum allowance causes the chain to experience up the teeth of the sprocket. This leads to harm to the tips of the chainwheels tooth, as the force transmitted by the chain is transmitted fully via the prime of the tooth, instead than the total tooth. This results in significant sporting of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Standards organizations (such as ANSI and ISO) sustain requirements for style, proportions, and interchangeability of transmission chains. For illustration, the adhering to Desk exhibits data from ANSI standard B29.1-2011 (Precision Electricity Transmission Roller Chains, Attachments, and Sprockets) developed by the American Culture of Mechanical Engineers (ASME). See the references[8][9][ten] for extra information.

ASME/ANSI B29.1-2011 Roller Chain Normal SizesSizePitchMaximum Roller DiameterMinimum Final Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Normal Dimensions
Dimensions Pitch Highest Roller Diameter Bare minimum Greatest Tensile Power Measuring Load
twenty five .250 in (6.35 mm) .one hundred thirty in (3.30 mm) 780 lb (350 kg) eighteen lb (8.2 kg)
35 .375 in (9.fifty three mm) .two hundred in (5.08 mm) one,760 lb (800 kg) eighteen lb (8.2 kg)
forty one .500 in (twelve.70 mm) .306 in (7.77 mm) one,five hundred lb (680 kg) eighteen lb (8.2 kg)
forty .500 in (12.70 mm) .312 in (7.ninety two mm) three,one hundred twenty five lb (1,417 kg) 31 lb (fourteen kg)
fifty .625 in (fifteen.88 mm) .400 in (10.16 mm) 4,880 lb (2,210 kg) forty nine lb (22 kg)
sixty .750 in (19.05 mm) .469 in (eleven.ninety one mm) seven,030 lb (3,a hundred ninety kg) 70 lb (32 kg)
eighty 1.000 in (twenty five.forty mm) .625 in (fifteen.88 mm) 12,five hundred lb (5,seven hundred kg) a hundred twenty five lb (fifty seven kg)
100 one.250 in (31.75 mm) .750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
a hundred and twenty one.500 in (38.ten mm) .875 in (22.23 mm) 28,125 lb (twelve,757 kg) 281 lb (127 kg)
140 one.750 in (forty four.forty five mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
a hundred and sixty two.000 in (50.eighty mm) one.125 in (28.58 mm) 50,000 lb (23,000 kg) five hundred lb (230 kg)
a hundred and eighty two.250 in (57.fifteen mm) one.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
two hundred 2.five hundred in (63.fifty mm) 1.562 in (39.sixty seven mm) seventy eight,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (seventy six.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) one,000 lb (450 kg

For mnemonic purposes, beneath is another presentation of key proportions from the identical regular, expressed in fractions of an inch (which was component of the thinking guiding the choice of preferred quantities in the ANSI normal):

Pitch (inches) Pitch expressed
in eighths
ANSI normal
chain quantity
Width (inches)
1four 28 twofive 18
three8 three8 threefive 3sixteen
1two foureight 4one 1four
12 four8 four 516
fiveeight 5eight 5 three8
34 6eight 6 one2
one 88 8 five8

Notes:
1. The pitch is the length in between roller centers. The width is the distance amongst the hyperlink plates (i.e. a bit far more than the roller width to permit for clearance).
2. The appropriate-hand digit of the regular denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The remaining-hand digit denotes the amount of eighths of an inch that make up the pitch.
four. An “H” following the regular variety denotes heavyweight chain. A hyphenated number following the standard quantity denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number sixty heavyweight triple-strand chain.
 A normal bicycle chain (for derailleur gears) utilizes slim 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load potential. The more sprockets at the rear wheel (traditionally 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the amount of speeds they are made to function with, for case in point, “ten velocity chain”. Hub gear or single velocity bicycles use 1/2″ x 1/8″ chains, the place 1/8″ refers to the highest thickness of a sprocket that can be utilized with the chain.

Typically chains with parallel formed back links have an even amount of backlinks, with each narrow link adopted by a broad 1.Chains constructed up with a uniform sort of website link, narrow at 1 and wide at the other stop, can be produced with an odd variety of links, which can be an gain to adapt to a special chainwheel-length on the other aspect these kinds of a chain tends to be not so robust.

Roller chains made employing ISO regular are occasionally called as isochains.

 

WHY Pick US 

1. Reliable High quality Assurance System
2. Reducing-Edge Laptop-Managed CNC Devices
3. Bespoke Remedies from Hugely Experienced Professionals
4. Customization and OEM Offered for Specific Application
5. In depth Stock of Spare Components and Equipment
6. Effectively-Developed Throughout the world Advertising Network
7. Efficient Right after-Sale Services Method

 

The 219 sets of advanced automated generation gear supply guarantees for high item good quality. The 167 engineers and professionals with senior expert titles can design and style and create items to satisfy the specific demands of buyers, and OEM customizations are also offered with us. Our sound international service community can provide consumers with well timed after-revenue technical companies.

We are not just a manufacturer and provider, but also an sector expert. We operate professional-actively with you to offer specialist guidance and solution tips in order to end up with a most cost successful product obtainable for your certain software. The customers we serve throughout the world assortment from conclude consumers to distributors and OEMs. Our OEM replacements can be substituted wherever needed and suited for both repair and new assemblies.

 

 

Over time, the sprocket enamel put on out thanks to friction brought on by the continuous physical speak to between the sprocket enamel and the sprocket. ep manufactures smart tooth sprockets with use indicator pins. These visual use indicators tell operators and inspectors when sprockets are even now functioning securely and when they want to be changed.
Drum sprockets: These sprockets are generally wider to increase the general surface area get in touch with between the sprocket and chain. This reduces tension on both sections, generating a much more durable system for large haul conveyors.

China best Transmission Conveyor Belt Parts Gearbox Short Pitch Precision Roller Chains and Bush Chains 10b 50 Teeth Hub Sprocket     with high quality

China Professional ISO/ANSI/DIN Standard Short Pitch Precision Roller Chains and Bush Chain Wheel Sprocket with high quality

Solution Description

Standard Information.

Kind:

Simplex, Duplex, Triplex

Sprocket Model:

3/8″,1/2″,5/8″,3/4″,1″,1.25″,1.fifty”,1.seventy five”,2.00″,2.25″,2.00″,2.25″,2.50″, 3″

Enamel Amount:

9-one hundred

Normal:

ANSI , JIS, DIN, ISO

Content:

1571, 1045, SS304 , SS316  As Per Person Request.

Functionality Treatment:

Carburizing, Higher Frequency Remedy, Hardening and Tempering, Nitriding

Area Therapy:

Black of Oxidation, Zincing, Nickelage.

Characteristic Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, etc
Design and style criterion ISO DIN ANSI & Customer Drawings
Application Industrial transmission gear
Deal Wooden Case / Container and pallet, or created-to-order

Certification:

ISO9001 SGS

High quality Inspection:

Self-check and Closing-check

Sample:

ODM&OEM, Trial Purchase Accessible and Welcome

Edge High quality 1st, Service very first, Competitive value, Fast delivery
Supply Time 10 days for samples. 15 days for official order.

 

Set up AND Employing

The chain spocket, as a generate or deflection for chains, has pockets to maintain the chain back links with a D-profile CZPT section with flat aspect surfaces  parallel to the centre aircraft of the chain back links, and outer surfaces at correct angles to the chain hyperlink centre aircraft. The chain back links are pressed firmly against the outer surfaces and each of the facet surfaces by the angled laying surfaces at the foundation of the pockets, and also the support surfaces of the wheel human body together with the conclude sides of the webs shaped by the foremost and trailing walls of the pocket.

Notice

When CZPT new chainwheels it is extremely essential that a new chain is equipped at the very same time, and vice versa. Utilizing an previous chain with new sprockets, or a new chain with old sprockets will trigger fast wear.

It is important if you are installing the chainwheels yourself to have the manufacturing unit provider guide certain to your product. Our chainwheels are made to be a immediate CZPT for your OEM chainwheels and as this sort of, the installation should be done in accordance to your types provider handbook.

During use a chain will extend (i.e. the pins will dress in leading to extension of the chain). Making use of a chain which has been stretched much more than the earlier mentioned optimum allowance triggers the chain to experience up the enamel of the sprocket. This leads to injury to the ideas of the chainwheels tooth, as the pressure transmitted by the chain is transmitted completely through the leading of the tooth, instead than the total tooth. This results in severe putting on of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Expectations companies (this kind of as ANSI and ISO) keep standards for design, dimensions, and interchangeability of transmission chains. For instance, the subsequent Table exhibits info from ANSI common B29.1-2011 (Precision Energy Transmission Roller Chains, Attachments, and Sprockets) created by the American Culture of Mechanical Engineers (ASME). See the references[8][9][10] for added details.

ASME/ANSI B29.1-2011 Roller Chain Common SizesSizePitchMaximum Roller DiameterMinimum Supreme Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Regular Sizes
Measurement Pitch Greatest Roller Diameter Least Supreme Tensile Energy Measuring Load
twenty five .250 in (6.35 mm) .130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 .375 in (9.53 mm) .two hundred in (5.08 mm) 1,760 lb (800 kg) eighteen lb (8.2 kg)
forty one .500 in (twelve.70 mm) .306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 .500 in (12.70 mm) .312 in (7.92 mm) 3,a hundred twenty five lb (1,417 kg) 31 lb (fourteen kg)
50 .625 in (fifteen.88 mm) .400 in (ten.sixteen mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
sixty .750 in (19.05 mm) .469 in (eleven.91 mm) seven,030 lb (3,a hundred ninety kg) 70 lb (32 kg)
eighty 1.000 in (twenty five.forty mm) .625 in (15.88 mm) 12,500 lb (5,seven-hundred kg) one hundred twenty five lb (fifty seven kg)
100 1.250 in (31.seventy five mm) .750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
one hundred twenty 1.500 in (38.10 mm) .875 in (22.23 mm) 28,a hundred twenty five lb (12,757 kg) 281 lb (127 kg)
one hundred forty one.750 in (44.45 mm) 1.000 in (twenty five.forty mm) 38,280 lb (seventeen,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) one.125 in (28.fifty eight mm) fifty,000 lb (23,000 kg) five hundred lb (230 kg)
a hundred and eighty 2.250 in (57.fifteen mm) one.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 two.500 in (sixty three.50 mm) one.562 in (39.67 mm) seventy eight,a hundred seventy five lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (seventy six.twenty mm) 1.875 in (forty seven.63 mm) 112,five hundred lb (fifty one,000 kg) one,000 lb (450 kg

For mnemonic functions, under is an additional presentation of important proportions from the very same common, expressed in fractions of an inch (which was component of the thinking behind the decision of preferred figures in the ANSI normal):

Pitch (inches) Pitch expressed
in eighths
ANSI common
chain variety
Width (inches)
1four twoeight two5 one8
three8 three8 three5 three16
12 foureight 4one onefour
onetwo foureight 4 5sixteen
58 fiveeight 5 38
three4 6eight 6 1two
1 eighteight eight 58

Notes:
one. The pitch is the length among roller centers. The width is the distance in between the hyperlink plates (i.e. marginally more than the roller width to enable for clearance).
two. The proper-hand digit of the common denotes 0 = normal chain, 1 = light-weight chain, 5 = rollerless bushing chain.
3. The still left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” adhering to the normal amount denotes heavyweight chain. A hyphenated number following the normal amount denotes double-strand (2), triple-strand (3), and so on. Therefore 60H-3 denotes number sixty heavyweight triple-strand chain.
 A common bicycle chain (for derailleur gears) employs narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not impact the load potential. The more sprockets at the rear wheel (historically 3-6, these days 7-12 sprockets), the narrower the chain. Chains are offered in accordance to the quantity of speeds they are created to perform with, for example, “10 velocity chain”. Hub equipment or solitary velocity bicycles use 1/2″ x 1/8″ chains, the place 1/8″ refers to the greatest thickness of a sprocket that can be used with the chain.

Usually chains with parallel formed back links have an even number of hyperlinks, with each and every slim hyperlink followed by a broad 1.Chains built up with a uniform variety of hyperlink, narrow at 1 and broad at the other stop, can be made with an odd variety of hyperlinks, which can be an advantage to adapt to a special chainwheel-length on the other side such a chain tends to be not so powerful.

Roller chains produced using ISO standard are occasionally referred to as as isochains.

 

WHY Choose US 
 

1. Trustworthy High quality Assurance Program
two. Chopping-Edge Personal computer-Managed CNC Machines
three. Bespoke Remedies from Very Skilled Professionals
four. Customization and OEM Available for Certain Software
five. In depth Inventory of Spare Parts and Equipment
6. Effectively-Developed Globally Advertising and marketing Community
seven. Effective Following-Sale Support System

 

The 219 sets of innovative automated generation gear give guarantees for high item quality. The 167 engineers and specialists with senior expert titles can design and build items to satisfy the specific calls for of consumers, and OEM customizations are also accessible with us. Our seem world-wide services community can offer clients with well timed soon after-revenue technological solutions.

We are not just a maker and provider, but also an market advisor. We work professional-actively with you to supply skilled guidance and product tips in buy to end up with a most expense efficient item offered for your specific application. The consumers we provide worldwide range from finish end users to distributors and OEMs. Our OEM replacements can be substituted where ever required and ideal for both repair and new assemblies.

 

 

System functionality is very dependent on the interaction of the sprockets, which indicates that the sprockets you pick travel the good results of your procedure. Make the appropriate and straightforward selection with ep’s sprockets. Tsubaki supplies chain and sprocket producing capabilities. The chain meshes nicely with the sprockets for prolonged service existence and reliable functionality. This implies prolonged-time period personal savings and real price for your functions. Lessen upkeep downtime, improve productivity and decrease substitute costs
Ep prefabricated steel sprockets are made of C1045 steel, induction hardened or warmth-dealt with metal, four hundred – 500 BHN hardness. Remember to specify the components you want. Except if or else requested, the exterior diameter of the hub must be adequate to accommodate the essential holes and keyways. Keys to these things are not supplied except if asked for or installed on the shaft. Split sprockets for welding or split sprockets for bolts offer an economical way to put in sprockets on shafts where elimination of the shaft assembly is prohibited. Many dimensions of sprockets are outfitted with holes, keyways, and established screws. Discs or partially completed sprockets are also stocked. For prolonged sprockets and idlers, specify the chain measurement employed.

China Professional ISO/ANSI/DIN Standard Short Pitch Precision Roller Chains and Bush Chain Wheel Sprocket     with high quality