Merchandise Description
SPROCKET 1/2” X 5/16” 08B Series SPROCKETS
| For Chain Acc.to DIN8187 ISO/R 606 | |||||
| Tooth Radius r3 | thirteen.0mm | ||||
| Radius Width C | one.3mm | ||||
| Tooth Width b1 | 7.0mm | ||||
| Tooth Width B1 | seven.2mm | ||||
| Tooth Width B2 | 21.0mm | ||||
| Tooth Width B3 | 34.9mm | ||||
| 08B Sequence ROLLER CHAINS | |||||
| Pitch | 12.7 mm | ||||
| Internal Width | 7.seventy five mm | ||||
| Roller Diameter | 8.51 mm | ||||
| Z | de | dp | SIMPLEX | DUPLEX | TRIPLEX |
| D1 | D2 | D3 | |||
| eight | 37.2 | 33.18 | 8 | 10 | 10 |
| nine | 41.0 | 37.13 | 8 | 10 | ten |
| ten | forty five.2 | 41.10 | 8 | ten | ten |
| 11 | 48.7 | forty five.07 | 10 | 10 | 12 |
| twelve | fifty three.0 | 49.07 | 10 | 10 | twelve |
| 13 | fifty seven.4 | fifty three.06 | 10 | 10 | twelve |
| fourteen | 61.8 | fifty seven.07 | ten | 10 | twelve |
| 15 | 65.5 | sixty one.09 | 10 | 10 | 12 |
| 16 | sixty nine.5 | 65.10 | ten | twelve | 16 |
| 17 | seventy three.6 | sixty nine.11 | 10 | twelve | 16 |
| 18 | seventy seven.8 | seventy three.14 | 10 | twelve | 16 |
| 19 | eighty one.7 | seventy seven.16 | 10 | 12 | 16 |
| 20 | 85.8 | 81.19 | 10 | 12 | sixteen |
| 21 | 89.7 | 85.22 | 12 | sixteen | 16 |
| 22 | 93.8 | 89.24 | twelve | 16 | sixteen |
| 23 | 98.2 | 93.27 | twelve | 16 | 16 |
| 24 | 101.8 | ninety seven.29 | 12 | 16 | sixteen |
| 25 | one hundred and five.8 | one hundred and one.33 | 12 | 16 | 16 |
| 26 | a hundred and ten.0 | 105.36 | 16 | 16 | sixteen |
| 27 | 114.0 | 109.40 | sixteen | sixteen | sixteen |
| 28 | 118.0 | 113.42 | 16 | 16 | sixteen |
| 29 | 122.0 | 117.46 | sixteen | sixteen | sixteen |
| thirty | 126.1 | 121.50 | sixteen | 16 | sixteen |
| 31 | one hundred thirty.2 | a hundred twenty five.54 | sixteen | 16 | twenty |
| 32 | 134.3 | 129.56 | sixteen | 16 | 20 |
| 33 | 138.4 | 133.60 | 16 | 16 | twenty |
| 34 | 142.6 | 137.64 | 16 | sixteen | twenty |
| 35 | 146.7 | 141.68 | 16 | sixteen | twenty |
| 36 | 151.0 | a hundred forty five.72 | sixteen | 20 | twenty |
| 37 | 154.6 | 149.76 | 16 | twenty | twenty |
| 38 | 158.6 | 153.80 | 16 | twenty | twenty |
| 39 | 162.7 | 157.83 | sixteen | twenty | twenty |
| forty | 166.8 | 161.87 | 16 | 20 | twenty |
| forty one | 171.4 | one hundred sixty five.91 | 20 | 20 | twenty five |
| forty two | one hundred seventy five.4 | 169.94 | 20 | 20 | 25 |
| 43 | 179.7 | 173.98 | 20 | 20 | 25 |
| forty four | 183.8 | 178.02 | 20 | twenty | twenty five |
| 45 | 188.0 | 182.07 | twenty | twenty | 25 |
| forty six | 192.1 | 186.10 | twenty | 20 | twenty five |
| 47 | 196.2 | a hundred ninety.14 | 20 | 20 | 25 |
| forty eight | 200.3 | 194.18 | 20 | twenty | 25 |
| 49 | 204.3 | 198.22 | 20 | 20 | twenty five |
| 50 | 208.3 | 202.26 | 20 | twenty | twenty five |
| fifty one | 212.1 | 206.30 | twenty | twenty five | twenty five |
| 52 | 216.1 | 210.34 | 20 | twenty five | 25 |
| fifty three | 220.2 | 214.37 | twenty | twenty five | twenty five |
| 54 | 224.1 | 218.43 | 20 | twenty five | twenty five |
| fifty five | 228.1 | 222.46 | twenty | twenty five | twenty five |
| fifty six | 232.2 | 226.50 | twenty | 25 | 25 |
| fifty seven | 236.4 | 230.54 | twenty | 25 | twenty five |
| 58 | 240.5 | 234.58 | 20 | 25 | twenty five |
| 59 | 244.5 | 238.62 | twenty | 25 | twenty five |
| sixty | 248.6 | 242.66 | 20 | twenty five | 25 |
| sixty two | 256.9 | 250.74 | twenty five | twenty five | 25 |
| sixty four | 265.1 | 258.82 | twenty five | twenty five | twenty five |
| 65 | 269.0 | 262.86 | 25 | twenty five | 25 |
| sixty six | 273.0 | 266.91 | twenty five | twenty five | twenty five |
| sixty eight | 281.0 | 274.99 | 25 | twenty five | 25 |
| 70 | 289.0 | 283.07 | 25 | twenty five | 25 |
| seventy two | 297.2 | 291.15 | twenty five | 25 | 25 |
| seventy five | 309.2 | 303.28 | 25 | twenty five | twenty five |
| 76 | 313.2 | 307.32 | 25 | 25 | twenty five |
| seventy eight | 321.4 | 315.40 | 25 | 25 | 25 |
| 80 | 329.4 | 323.49 | 25 | 25 | 25 |
| eighty five | 349.0 | 343.69 | 25 | twenty five | 25 |
| 90 | 369.9 | 363.90 | twenty five | 25 | 25 |
| 95 | 390.1 | 384.11 | twenty five | 25 | twenty five |
| 100 | 410.3 | 404.32 | twenty five | twenty five | 25 |
| one hundred ten | 450.7 | 444.74 | twenty five | twenty five | 25 |
| 114 | 466.9 | 460.91 | 25 | twenty five | 25 |
| one hundred twenty | 491.2 | 485.16 | 25 | twenty five | twenty five |
| one hundred twenty five | 511.3 | 505.37 | 25 | 25 | twenty five |
Standard Data.
|
Sort: |
Simplex, Duplex, Triplex |
|
Sprocket Model: |
three/8″,1/2″,5/8″,3/4″,1″,1.25″,1.fifty”,1.seventy five”,2.00″,2.25″,2.00″,2.twenty five”,2.fifty”, 3″ |
|
Enamel Amount: |
9-100 |
|
Regular: |
ANSI , JIS, DIN, ISO |
|
Content: |
1571, 1045, SS304 , SS316 As Per Consumer Request. |
|
Performance Treatment method: |
Carburizing, Large Frequency Treatment method, Hardening and Tempering, Nitriding |
|
Floor Therapy: |
Black of Oxidation, Zincing, Nickelage. |
| Attribute | Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, and many others |
| Layout criterion | ISO DIN ANSI & Customer Drawings |
| Application | Industrial transmission products |
| Deal | Wooden Circumstance / Container and pallet, or created-to-buy |
|
Certification: |
ISO9001 SGS |
|
Quality Inspection: |
Self-check and Final-check out |
|
Sample: |
ODM&OEM, Trial Purchase Offered and Welcome |
| Gain | Quality very first, Support 1st, Aggressive value, Rapidly shipping |
| Supply Time | ten days for samples. 15 days for official order. |
Set up AND Employing
The chain spocket, as a drive or deflection for chains, has pockets to maintain the chain back links with a D-profile CZPT segment with flat aspect surfaces parallel to the centre plane of the chain backlinks, and outer surfaces at right angles to the chain link centre aircraft. The chain links are pressed firmly against the outer surfaces and every of the aspect surfaces by the angled laying surfaces at the base of the pockets, and also the assist surfaces of the wheel physique collectively with the finish sides of the webs shaped by the foremost and trailing walls of the pocket.
Observe
When CZPT new chainwheels it is really crucial that a new chain is equipped at the very same time, and vice versa. Using an aged chain with new sprockets, or a new chain with previous sprockets will cause rapid dress in.
It is essential if you are setting up the chainwheels by yourself to have the manufacturing unit provider manual distinct to your design. Our chainwheels are produced to be a immediate CZPT for your OEM chainwheels and as this sort of, the installation must be performed according to your versions support handbook.
During use a chain will extend (i.e. the pins will use causing extension of the chain). Employing a chain which has been stretched a lot more than the earlier mentioned optimum allowance leads to the chain to experience up the enamel of the sprocket. This brings about harm to the suggestions of the chainwheels enamel, as the power transmitted by the chain is transmitted fully through the best of the tooth, fairly than the whole tooth. This final results in significant sporting of the chainwheel.
FOR CHAIN STHangZhouRDS
Standards corporations (such as ANSI and ISO) sustain specifications for layout, proportions, and interchangeability of transmission chains. For instance, the adhering to Table displays knowledge from ANSI regular B29.1-2011 (Precision Electrical power Transmission Roller Chains, Attachments, and Sprockets) produced by the American Modern society of Mechanical Engineers (ASME). See the references[8][9][ten] for additional information.
ASME/ANSI B29.1-2011 Roller Chain Regular SizesSizePitchMaximum Roller DiameterMinimum Greatest Tensile StrengthMeasuring Load25
| ASME/ANSI B29.1-2011 Roller Chain Common Sizes | ||||
| Size | Pitch | Maximum Roller Diameter | Minimal Final Tensile Power | Measuring Load |
|---|---|---|---|---|
| twenty five | .250 in (6.35 mm) | .130 in (3.thirty mm) | 780 lb (350 kg) | eighteen lb (8.2 kg) |
| 35 | .375 in (9.fifty three mm) | .200 in (5.08 mm) | one,760 lb (800 kg) | eighteen lb (8.2 kg) |
| 41 | .five hundred in (twelve.70 mm) | .306 in (7.seventy seven mm) | 1,five hundred lb (680 kg) | 18 lb (8.2 kg) |
| 40 | .five hundred in (twelve.70 mm) | .312 in (7.92 mm) | 3,one hundred twenty five lb (1,417 kg) | 31 lb (fourteen kg) |
| fifty | .625 in (15.88 mm) | .four hundred in (ten.16 mm) | four,880 lb (2,210 kg) | 49 lb (22 kg) |
| sixty | .750 in (19.05 mm) | .469 in (eleven.91 mm) | seven,030 lb (3,one hundred ninety kg) | 70 lb (32 kg) |
| 80 | 1.000 in (twenty five.40 mm) | .625 in (15.88 mm) | 12,five hundred lb (5,seven hundred kg) | 125 lb (fifty seven kg) |
| a hundred | one.250 in (31.75 mm) | .750 in (19.05 mm) | 19,531 lb (8,859 kg) | 195 lb (88 kg) |
| 120 | 1.500 in (38.10 mm) | .875 in (22.23 mm) | 28,125 lb (12,757 kg) | 281 lb (127 kg) |
| a hundred and forty | 1.750 in (44.45 mm) | one.000 in (25.40 mm) | 38,280 lb (17,360 kg) | 383 lb (174 kg) |
| one hundred sixty | two.000 in (50.80 mm) | one.a hundred twenty five in (28.fifty eight mm) | 50,000 lb (23,000 kg) | five hundred lb (230 kg) |
| one hundred eighty | 2.250 in (fifty seven.fifteen mm) | 1.460 in (37.08 mm) | sixty three,280 lb (28,seven-hundred kg) | 633 lb (287 kg) |
| two hundred | two.500 in (63.50 mm) | 1.562 in (39.67 mm) | 78,a hundred seventy five lb (35,460 kg) | 781 lb (354 kg) |
| 240 | 3.000 in (76.twenty mm) | 1.875 in (47.63 mm) | 112,five hundred lb (fifty one,000 kg) | one,000 lb (450 kg |
For mnemonic needs, underneath is an additional presentation of important proportions from the identical common, expressed in fractions of an inch (which was component of the thinking powering the choice of chosen numbers in the ANSI standard):
| Pitch (inches) | Pitch expressed in eighths |
ANSI regular chain number |
Width (inches) |
|---|---|---|---|
| 1⁄four | two⁄eight | two5 | 1⁄8 |
| three⁄eight | 3⁄8 | threefive | 3⁄sixteen |
| one⁄2 | 4⁄eight | 4one | one⁄four |
| one⁄two | 4⁄eight | 4 | five⁄16 |
| five⁄eight | 5⁄8 | five | three⁄eight |
| 3⁄four | six⁄8 | 6 | 1⁄2 |
| 1 | eight⁄eight | eight | 5⁄8 |
Notes:
one. The pitch is the distance in between roller facilities. The width is the distance amongst the url plates (i.e. a bit far more than the roller width to permit for clearance).
2. The right-hand digit of the standard denotes 0 = standard chain, 1 = lightweight chain, 5 = rollerless bushing chain.
three. The still left-hand digit denotes the quantity of eighths of an inch that make up the pitch.
4. An “H” following the normal amount denotes heavyweight chain. A hyphenated number adhering to the common variety denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes amount sixty heavyweight triple-strand chain.
A normal bicycle chain (for derailleur gears) utilizes slender 1⁄2-inch-pitch chain. The width of the chain is variable, and does not influence the load capability. The far more sprockets at the rear wheel (historically 3-6, today 7-12 sprockets), the narrower the chain. Chains are marketed according to the amount of speeds they are created to work with, for illustration, “ten velocity chain”. Hub gear or single velocity bicycles use 1/2″ x 1/8″ chains, the place 1/8″ refers to the highest thickness of a sprocket that can be utilised with the chain.
Generally chains with parallel formed hyperlinks have an even quantity of backlinks, with every single narrow url adopted by a broad 1.Chains constructed up with a uniform variety of url, narrow at 1 and broad at the other finish, can be created with an odd variety of links, which can be an gain to adapt to a special chainwheel-distance on the other facet this kind of a chain tends to be not so sturdy.
Roller chains created utilizing ISO common are at times known as as isochains.
WHY Decide on US
one. Dependable High quality Assurance Technique
2. Cutting-Edge Pc-Managed CNC Devices
three. Bespoke Options from Highly Knowledgeable Professionals
4. Customization and OEM Obtainable for Particular Application
5. In depth Stock of Spare Parts and Equipment
6. Effectively-Created Globally Advertising Network
seven. Productive Following-Sale Service Technique
The 219 sets of sophisticated automatic creation gear provide assures for substantial merchandise top quality. The 167 engineers and experts with senior expert titles can layout and create merchandise to meet up with the exact needs of buyers, and OEM customizations are also obtainable with us. Our sound global support community can offer consumers with timely right after-sales complex companies.
We are not just a company and provider, but also an industry specialist. We perform pro-actively with you to offer expert suggestions and solution tips in purchase to stop up with a most cost effective merchandise available for your certain application. The clientele we provide throughout the world assortment from end customers to distributors and OEMs. Our OEM replacements can be substituted anywhere needed and suitable for equally mend and new assemblies.
Sprockets are produced to ISO606 and ASME B29.one hundred specifications, obtainable in plate, solitary and double hub configurations, made from substantial quality carbon metal, optional tapered bushings simplify installation and elimination, treatments accessible upon request, such as black oxide
Roller sprockets are frequently utilized in industrial and commercial programs to transmit drive to the chain by meshing with rollers on the chain, the teeth of which mate with the interior plates of the chain. A broad variety of purposes benefit from these, which includes conveyor belts, large industrial drives, robotics, electrical assembly, and far more.
